Toshiba TDP-T30 Gebruikershandleiding - Pagina 10

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Toshiba TDP-T30. Toshiba TDP-T30 23 pagina's. Data projector (xga)

Pagina afdrukken

Preparing and using the remote control

Loading dry-cell batteries

into the remote control

q Remove the battery cover.

w Insert the dry-cell batteries.

Be sure to align the plus and minus

ends of the batteries properly.

Two batteries (LR06, SIZE AAA) are

used.

e Replace the battery cover.

(1)

(2)

Dry-cell batteries

• Before using the batteries, be sure to observe the Safety Precautions described in

previous pages.

• Remove batteries from remote control when not using for extended periods.

• If the remote control stops working, or if its range decreases, replace all the batteries with

new ones.

The remote control

• The remote control may fail to operate if the infrared remote sensor is exposed to bright

sunlight or fluorescent lighting.

• Do not drop or bang.

• Do not leave in hot or humid locations.

• Do not get wet or place on top of wet objects.

• Do not take apart.

• In rare cases, ambient conditions could impede the operation of the remote control. If this

happens, point the remote control at the main unit again, and repeat the operation.

Operating the remote

control

Point the remote control toward the

projector's infrared remote sensor,

and press a button on the remote

control.

• Operating the projector from the front

Approx. 15°

• Operating the projector from the rear

Approx. 15°

Switching operation modes

Operation modes should be switched between projector operation and computer operation.

Switching the remote control operation mode.

Pressing this button toggles the mode.

When this button is lit, the remote control is in [PJ Mode]

(Projector operation mode).

If no operations are made for 30 seconds, this light goes

out, and the remote switches back to [PC Mode] (Computer

operation mode).

[PJ Mode] : Functions as a select button.

[PC Mode] : Functions as a mouse pointer control.

PJ MODE

ENTER

[PC Mode] : Functions as a down button. Used to go back

R-CLICK

RETURN

ESC

[PC Mode] : Functions as an up button. Used to go forward

INPUT

SET UP

[PJ Mode] : Functions as a ENTER button.

FREEZE

[PC Mode] : Functions as the right mouse button (R-CLICK).

[PJ Mode] : Functions as a RETURN button.

[PC Mode] : Functions as a ESC button.

Pressing one of these buttons automatically sets the remote

control to [PJ Mode].

If no operations are made for 30 seconds, and the remote

switches back to [PC Mode].

The L-CLICK (left click) button on the back of the remote

control functions when in [PC Mode].

Note

• With the exception of operating a PC with the remote control, all buttons are used in [PJ

Mode].

If no menu is displayed, adjusts volume.

on Microsoft

PowerPoint

slides, etc.

on Microsoft

PowerPoint

slides, etc.