Philips FW P880 Gebruikershandleiding - Pagina 31

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Philips FW P880. Philips FW P880 32 pagina's. Mini hi-fi system with 3cd changer, 400 watts total power, 5 speaker dolby pro-logic system and woox technology
Ook voor Philips FW P880: Specificaties (2 pagina's)

Pagina afdrukken
Philips FW P880 Gebruikershandleiding
RADIO RECEPTION
Radio reception is poor.
TAPE OPERATION/RECORDING
Recording or playback cannot be made.
The tape deck door cannot open.
Recorded material sounds strange.
GENERAL
The system does not react when buttons
are pressed.
Sound cannot be heard or is of poor
quality.
The left and right sound outputs are
reversed.
The remote control does not function
properly.
The timer is not working.
Not all lighted buttons are showing light.
The Clock/Timer setting is erased.
The system displays features
automatically and buttons start flashing.
pg 001-032/P880/37-Eng
– If the signal is too weak, adjust the antenna or
connect an external antenna for better reception.
– Increase the distance between the Mini HiFi
System and your TV or VCR.
– Clean deck parts, see "Maintenance".
– Use only NORMAL (IEC I) or IEC type II (Cr0
tape.
– Apply a piece of adhesive tape over the missing
tab space.
– Remove and reconnect the AC power plug and
switch on the system again.
– Switch off Dolby Pro Logic mode when
recording.
– Remove and reconnect the AC power plug and
switch on the system again.
– Adjust the volume.
– Disconnect the headphones.
– Check that the speakers are connected correctly.
– Check if the stripped speaker wire is clamped.
– Check the speaker connections and location.
– Select the source (CD or TUNER, for example)
before pressing the function button (É,í,ë).
– Reduce the distance between the remote control
and the system.
– Insert the batteries with their polarities
(+/– signs) aligned as indicated.
– Replace the batteries.
– Point the remote control in the direction of the
system's IR sensor.
– Set the clock correctly.
– Press the TIMER ON/OFF to switch on the timer.
– If recording is in progress, stop recording.
– Press DIM to select DIM OFF display mode.
– Power has been interrupted or the power cord
has been disconnected. Reset the clock/timer.
– Press and hold DEMO STOP Çon the system
to switch off the demonstration.
31

Troubleshooting

3139 115 20421
12/8/00, 1:54 PM
)
2
31