MSI RX800 series CorssFire Installatiehandleiding

Blader online of download pdf Installatiehandleiding voor {categorie_naam} MSI RX800 series CorssFire. MSI RX800 series CorssFire 2 pagina's. Pci express interface, ati radeon x850 / x800 series inside

Pagina afdrukken

Seamless integration of pixel shaders with video in real time

FULLSTREAM

video de-blocking technology for Real, DivX, and WMV9 formats

VIDEOSOAP

noise removal filtering for captured video

MPEG1/2/4 decode and encode acceleration

Adaptive Per-Pixel De-Interlacing and Frame Rate Conversion (temporal filtering)

* Innovative 0.11 micron process technology

2D Display Modes: Resolutions, colors and maximum refresh rates(Hz) for 256, 65K or 16.7M

colors

640x480

200Hz

1600x1200

800x600

200Hz

1920x1080

1024x768

200Hz

1920x1200

1152x864

200Hz

1920x1440

1280x1024

160Hz

2048x1536

ardware Installation

Follow the steps

below

to install the VGA card :

1. Remove the computer case.

2. Locate the PCI Express slot on your

mainboard.

(Refer to Figure 1)

Warning: Inserting the VGA card into a wrong

slot (e.g. AGP slot) may damage your card

(refer to your mainboard manual for more

Information).

3. Put the card directly over the

PCI Express

slot

and

press one end of the card into the slot

Standard RADEON card

first. Gently but firmly press the other end

until it is fully seated in the slot.

(Refer to Figure 1)

4. Follow the steps listed above to insert another

DVI Connector

VGA card, and then secure both cards with

bracket screws.

(Refer to Figure 1)

5. Using the supplied CrossFire cable to connect

the DMS connector of

CrossFire Edition card

to the

DVI connector of

Standard RADEON

card. (Refer to Figure 2)

. Install all other cards and devices and connect

all necessary cables, and then install the case.

7. Connect the monitor. Now, you are ready to

CorssFire

install the software on your computer.

Cable

oftware Installation

(for

Windows XP

)

To install the driver of the VGA card to your computer running

follow the steps below:

1. Turn on the computer.

2. Insert the

into the CD-ROM drive. The Autorun program will start the Setup

program, and show the setup screen as follows:

120Hz

100Hz

90Hz

85Hz

Figure 1

3. Click ATi VGA Drivers. Follow the on-screen instructions to complete the

installation.

4. After finishing the installation, restart the computer as instructed.

nstalling MSI Live Update 3

MSI

Live Update 3

is a useful utility for you to upgrade your MSI

VGA card. Thanks to the powerful capacity of this utility, you can conveniently

download and automatically update the BIOS and the drivers on-line, without spending

much time in searching many Web sites to find the BIOS or drivers you want.

CrossFire Edition card

Installing from the CD-Title

1. Insert the CD into the CD-ROM drive, and start the Setup program.

2. Click the Utility tab on the setup screen.

3. Click the MSI

Live Update 3 . Follow the on-screen instructions to complete the

installation.

Installing from the MSI

Web Site

1. Make connection to MSI's website at http://www.msi.com.tw

DMS Connector

2. Select /Support/Live Update 3/ on the upper part of the MSI's homepage to enter

the setup page.

DVI Output

Figure 2

Windows XP, please

Tip : If, on your computer, the

Autorun program does not execute

automatically, please 1) enable the

CD-ROM drive Auto-detect function

from Control Panel; or 2) find and

run the setup.exe file manually from

the CD.

mainboard and

Click the

InstallShield Wizard button to have the program of MSI

Update 3

with MSI

Live monitor downloaded and installed on your system

automatically, or click here (manual) to download and install the program manually.

4. Follow the on-screen instructions to complete the installation.

The page of the MSI

Live Update 3

sing MSI Live VGA Driver Update

MSI

Live VGA Driver

Update

This service enables you to update the latest VGA driver for your VGA card.

1. To update the MSI

Live VGA Driver , click Live VGA Driver

column of the main page.

2. This utility will start checking your platform and the information on the VGA card, and

display the information in a list.

3. Click the graph button on the bottom to connect MSI Live Update Series Server.

Then, it will automatically connect the Internet and compare the version of the driver

in the database.

4. It may take several minutes to detect the required drivers. Please wait while

proceeding detection.

5. Click the InstallShield Wizard button on the right side of the table to download and

update the driver. All actions will proceed automatically.

6. Follow the on-screen instructions to complete the updating procedure.

Live

item on the left