Toshiba TLPLW3 Gebruikershandleiding - Pagina 23
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Toshiba TLPLW3. Toshiba TLPLW3 37 pagina's. Data projector (xga / with pc card slot)
Pagina afdrukken
Projecting images stored in a memory PC card (Continued)
• [Interval]
You can set the display interval of time (in seconds or minutes) for slide shows to be
played automatically.
• [Display effect]
When playing a slide show, the projector can give various display effects or transitions
to each slide being displayed.
The transitions available are listed below:
None
•
Display each slide normally.
Wipe
•
Display the next slide gradually upward (Wipe ↑), downward (Wipe ↓), to the left
(Wipe ←), or to the right (Wipe →), over the current slide.
Dissolve
•
Display the next slide gradually in a certain fixed block pattern over the current slide.
Cover
•
Display the next slide as sliding upward (Cover ↑), downward (Cover ↓), to the left
(Cover ←), or to the right (Cover →), over the current slide.
Checker
•
Display the next slide gradually from the left using checkered blocks over the current
slide.
Zoom/Rotate zoom
•
Display the next slide by enlarging it gradually, either straight from the center (Zoom)
or while turning it starting from the center (Spin zoom), over the current slide.
Belt wipe
•
Display the next slide gradually in stripes from both sides, over the current slide.
Blind
•
Display the next slide, as if it opened like a window blind, over the current slide.
• [Play icon]
The slideshow icon can be displayed.
Standard
•
The projector handles the slideshow icon as follows depending on the "On/Off"
setting of Icon on the projector's menu.
Icon On: The projector displays the icon upon the start of playing a slide show and
turns it off after a few seconds.
Icon Off: The projector does not display the icon.
Continuous
•
The projector keeps the icon displayed during the slide show.
44
Automatic demonstration
If you set Auto. demo to On in "Setting slideshow options"
a slide show automatically when it switches to the wireless/card input mode with a
memory PC card plugged into the PC card slot according to the procedure in
"Mounting a PC card"
.
p.21
• The slide show is played as set in "Setting slideshow options".
• The slide show displays the JPEG files stored in the root directory of the memory PC
card.
• If you set PC card display to Auto, the projector starts a slide show automatically when
the power is turned on with a memory PC card plugged.
• To suspend the slide show, press the
• To end the slide show, press the RETURN button. A thumbnail list will then be displayed.
, the projector starts
p.43
button. Pressing it again resumes the slide show.
45