3Com 3crwe875075a Configuratiehandleiding - Pagina 2
Blader online of download pdf Configuratiehandleiding voor {categorie_naam} 3Com 3crwe875075a. 3Com 3crwe875075a 10 pagina's. Wds bridging and antenna installation
Ook voor 3Com 3crwe875075a: Conversiehandleiding (10 pagina's), Snelstarthandleiding (8 pagina's)
Pagina afdrukken
Point-to-Multipoint WDS Link
The following example shows point-to-multipoint WDS links configured between multiple access points.
Point-to-Point WDS Link
Wireless Desktops
WDS Security and Spanning Tree Support
For added security, the AP 8250 supports AES encryption over the WDS link. Additionally, Spanning Tree
Protocol (STP) support prevents loops from being formed on the network. For more information on these
items, see the Wireless LAN Access Points User Guide.
Configuring WDS Bridging
WDS Bridging can be configured in numerous ways. This section describes two common installation
scenarios and the equipment required to complete the configurations:
Remote building wireless access with the AP8850
Remote building wireless access with the AP8250 and 802.11g Upgrade Kit
Configuration Guidelines
Before configuring the WDS settings, review the following guidelines:
The WDS link can be set up between 3Com access points only.
The pair of access points to be configured with a WDS link must be set to the same
radio channel and SSID, and the link must be set up between 802.11a radios or
802.11g radios (that is, 802.11a to 802.11a or 802.11g to 802.11g).
The access points must be configured with security and standard access point settings
before configuring the WDS link(s).
A Root Bridge can have a maximum of six Child Bridges assigned to it.
A Child Bridge can have a maximum of five Child Bridges assigned to it.
Antenna Guidelines
The 802.11a and 802.11g radios can be used with the following antennas in a bridging application:
802.11a radio: 3CWE591, 3CWE598, 3CWE596
802.11g radio: 3CWE491, 3CWE495, 3CWE498
WDS Link
WDS Link
2
Wireless Desktops
Wireless Desktops