Croydex MM010122 Handmatig - Pagina 2

Blader online of download pdf Handmatig voor {categorie_naam} Croydex MM010122. Croydex MM010122 2 pagina's.

Pagina afdrukken

HNL Bracket image shown for reference only

Assemble the Hang 'N' Lock bracket sections making sure all parts are

slotted together tightly.

Place the Hang 'N' Lock bracket onto the metal mounting plates at the

back of the mirror and measure the dimension 'A' – See fig.1.

Determine the desired location and orientation of the mirror and then

mark a point at the top edge of the mirror on the wall surface. Using

dimension 'A' draw a horizontal reference line below the top mark to

determine the position of the bottom edge of the Hang 'N' Lock bracket.

HNL Bracket image shown for reference only

Drill the marked holes to a depth of 45mm.

Insert the wall plugs level with the surface

of the wall. (Note: if you are fitting the

product to a tiled surface, insert the wall

plugs below the surface of the tile to avoid

cracking, the tile) Insert 2 x screws (Either

countersink or standard screws can be

used) through the Hang 'N' Lock cams and

loosely secure the Hang 'N' Lock bracket

to the wall.

For details of the other items in the Croydex range please visit our website: www.croydex.com

Croydex Ltd, Central Way, Andover, Hants, SP10 5AW, UK

Tel: +44 (0) 1264 365881

Fax: +44 (0) 1264 356437

Email: [email protected]

'A'

Bottom edge of Hang 'N' Lock bracket

(Note: HNL bracket shown in images is for reference only)

HNL Bracket image shown for reference only

With the Hang 'N' Lock bracket loosely

attached to the wall, adjust for height

and level by rotating the cams with

a flat head screwdriver aligning the

bottom edge of the HNL bracket with

the reference line, then fully tighten the

mounting screws using a philips

screwdriver, to securely fix the bracket

into position. Adjust for level if required.

Top edge of mirror

Marked Screw Position

HNL Bracket image shown for reference only

Place the bottom edge of the Hang 'N'

Lock bracket onto the reference line

and using a pencil, mark the screw hole

positions in each cam recess. Remove

the Hang 'N' Lock bracket from the wall

surface prior to drilling.

Hang the mirror onto the Hang'N'Lock

bracket and ensure it is securely

attached before releasing.

Image 5 shows the mirror, hanging in

portrait orientation, correctly positioned

on the Hang'N'Lock bracket.

MIR 030 R01