Croydex AP2300 Montage-instructies

Blader online of download pdf Montage-instructies voor {categorie_naam} Croydex AP2300. Croydex AP2300 2 pagina's. Wall mounted fold away shower seat

AP2300 Wall Mounted Fold Away Shower Seat - Fitting Instructions

Thank you for purchasing this Croydex product. Please follow the fixing and care

instructions to ensure that your Fold Away Shower Seat is fitted safely and that it

retains its high quality finish.

Fixing Pack Contents

Fixing Bolt x 3

Wall Plug x 3

Washer x 3

Please ensure that fixings are compatible with wall construction materials

KEEP DIY TOOLS OUT OF THE REACH OF CHILDREN

Safety and Care Advice

1. Always take care when using a drill, particularly in the bathroom. Always

check for hidden cables and pipework before drilling and take extreme care if

there is any water in the working area.

2. It is advisable to use a residual current circuit breaker (RCCB). Always wear

suitable eye protection when drilling.

3. If the product is to be fitted on a ceramic tiled wall, a ceramic drill bit should

be used. Always ensure that the drill hole passes through the central tiled

area rather than through the grouted area. To prevent damage to the tile,

mask the area around the hole with tape before drilling.

4. It is recommended that two people fit this product to ensure that it is fitted

safely.

Product Location

Grab and support bars are only as strong as the wall to which they are fixed and the

fixings that are used.

For solid brick and concrete block walls please use the fixings supplied.

For other wall types you will need to ensure that you are using the correct type of

fixing for the material of the wall.

The addition of backboards on the outside of the wall or appropriate strengthening of

internal structures may be required to provide adequate wall strength.

If the wall is made of lightweight thermal blocks, aerated hollow

brickwork or prefabricated partitions even the most appropriate fixings

may not be able to withstand the loads which can be suddenly applied

to grab bars, hinged support bars and seats.

Tools Required

Pencil

Drill

12mm masonry drill bit

12mm ceramic drill bit (optional)

Spirit Level

13mm Spanner or Socket

S&H 007 R01