Croydex CHAUMONT MM8301 E Series Installatiehandleiding - Pagina 5

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Croydex CHAUMONT MM8301 E Series. Croydex CHAUMONT MM8301 E Series 10 pagina's. Led illuminated mirror

Pagina afdrukken

Drill the marked holes to a depth of 45mm.

Insert the wall plugs level with the surface of

If you are fitting to a tiled surface,

the wall.

insert the wall plugs below the surface of the

tile to avoid cracking the tiles. Wall plugs

supplied are for use on solid walls only.

Fig. 6)

NOTE:

CAVITY WALLS

For

use toggle bolts provided. See

5 - Toggle Bolt Installation.

Step 7.

Insert the countersink screws through the

Hang 'n' Lock cams and loosely secure the

Hang 'n' Lock bracket to the wall.

(See Fig. 7)

Note: Check the cams are oriented

correctly with the countersink holes

positioned at the top.

With the Hang 'n' Lock bracket loosely

attached to the wall, adjust for height and

level by rotating the cams with a flat head

screwdriver. Use the attached spirit level as

a guide. Once complete, fully tighten the

mounting screws to securely fix the bracket into

position.

(See Fig. 8)

Hang the mirror onto the Hang 'n' Lock

bracket. Ensure the mirror has securely located

onto the bracket before letting go.

(See Fig. 9)

Note: If the mirror is not vertical, remove

the mirror, loosen bracket screws and

repeat Step 6.

Note: The position of the

mirror can be adjusted

by sliding left or right

along the bracket.

(See

PLASTERBOARD

SECTION

Continue to

fig. 6

fig. 7

fig. 8

fig. 9

COUNTERSINK

SCREWS

MIR 039 R07