CRRC MS-BT20 Installatiehandleiding - Pagina 15

Blader online of download pdf Installatiehandleiding voor {categorie_naam} CRRC MS-BT20. CRRC MS-BT20 17 pagina's. For 1/2” meishan bobtail

APPENDIX 1 - List of Warranty and Life Cycle

P.N.

MS-BT20-01

MS-BT20-02

TOOL

MS-BT20-05

MS-BT20-07

N/A

MS-BT20-06

Wear parts

MS-7880L-01

MS-7880-02-D Jaw

*1: whichever comes first shall be prevailed.

Note: the Warranty and Life Cycle are based on standard operation and proper maintenance

without artificial damage.

Requirements on replacing consumables and wear parts:

1. the trained bench worker is required using specific tools.

2. the warranty period of TOOL components shall NOT be re-calculated by replacing wear parts.

3. if the TOOL is failed during warranty period, send it to Meishan or its authorized service center

to repair.

Requirements for use:

1. Check and confirm no obvious crack on tool;

2. Hold tool trigger depressed for 30 seconds; depress trigger a few times to cycle tool and to

circulate hydraulic fluid. Observe action of tool and check for leaks.

3. Check and confirm the pressure is correct.

Desc.

Warranty

Cylinder ASSY.

1 year/50,000 pulls*

Piston

1 year/50,000 pulls*

Handle

1 year/50,000 pulls*

Pipe

1 year/50,000 pulls*

Seals Kit

20,000 pulls

Trigger Switch

20,000 pulls

Anvil

20,000 pulls

4,000 pulls

Life Cycle

20,000 pulls

4,000 pulls