CRU DataPort 3 Installatiehandleiding

Blader online of download pdf Installatiehandleiding voor {categorie_naam} CRU DataPort 3. CRU DataPort 3 2 pagina's.

Pagina afdrukken
Limitation of Liability:
The warranties set forth in this agreement replace all other warranties. CRU expressly
disclaims all other warranties, including but not limited to, the implied warranties of
merchantability and fitness for a particular purpose and noninfringement of third-party
rights with respect to the documentation and hardware. No CRU dealer, agent or
employee is authorized to make any modification, extension, or addition to this
warranty. In no event will CRU or its suppliers be liable for any costs of procurement
of substitute products or services, lost profits, loss of information or data, computer
malfunction, or any other special, indirect, consequential, or incidental damages
arising in any way out of the sale of, use of, or inability to use any CRU product or
service, even if CRU has been advised of the possibility of such damages. In no case
shall CRU's liability exceed the actual money paid for the products at issue.
1.0
Rev
DataPort™ 3 Installation Guide
P
I
REPARATION FOR
NSTALLATION
Note: To prevent data loss, read this manual before installing or
operating the DataPort 3.
Before touching any electrical equipment, ground yourself by touching the
metal part of your computer chassis. This discharges static electricity and
prevents any damage to your computer. CRU is not responsible for static
discharge damage.
T
R
:
OOLS
EQUIRED
Phillips screwdriver.
O
THER ITEMS THAT MAY BE NEEDED ARE
Computer Users Manual.
HDD manual (to set slave/master jumper for IDE only.)
Serial ATA cable or internal IDE data cable.
F
I
RAME
NSTALLATION
1.
Identify the 5.25" half-height bay in which you plan to mount the
DataPort 3 frame assembly. Remove any filler plates that may be present.
2.
If the drive bay requires mounting rails, install one on each side of the
frame. The mounting rails should be provided with your computer system.
3.
Slide the frame into the 5.25" bay of the PC case. If needed, use the
screws provided to secure the frame assembly to the PC case with the
frame's side mounting holes.
: