CRU Dataport 10 USB-to-SATA Installatiehandleiding - Pagina 2

Blader online of download pdf Installatiehandleiding voor {categorie_naam} CRU Dataport 10 USB-to-SATA. CRU Dataport 10 USB-to-SATA 2 pagina's.

Pagina afdrukken

CRU Dataport 10 USB-to-SATA Installatiehandleiding

8. Locate an available 4-Pin molex power cable from the computer power

supply and plug it into the power connector on the frame.

The frame installation is now completed.

Mounting a Hard Drive in the Carrier

1. The metal cover for DataPort 10 is secured by a screw. Remove the screw

and slide the top cover off the DataPort 10 carrier.

2. Slide the hard drive in from the front of the carrier and connect it

to the carrier circuit board. If the hard drive does not ﬁt, remove the

screw holding the circuit board in the carrier. Place the hard drive in

the carrier, then connect the circuit board to the hard drive. Secure

the circuit board with the screw and then secure the hard drive with

the provided screws.

3. Attach the Temperature Control Cooling Sensor (TCCS) to the top

of the hard drive with an adhesive strip. After the drive has been

installed, replace the top cover and secure it with the provided screw.

4. Insert the carrier into the frame assembly. Ensure that the lock of the

DataPort is in the "open" (vertical) position. Position the carrier on the

guide rails, and then slide the carrier into the frame. Using thumb pres-

sure, fully seat the carrier in the frame and lock the unit with the key lock.

Operation

Turn on the Power

The lock on the DataPort locks the carrier in place and also serves as the

power "ON/OFF" switch. Turn the lock 90 degrees clockwise to the "ON"

position before turning on the computer. When the computer is turned

on, the "Power On" LED (green light emitting diode above the key on the

frame assembly) is illuminated, and your system should operate normally.

Setting up the drive for Windows 2000/XP/Vista or Mac OS 9.x/X

No new drivers are required. The hard disk drive will be found and a

window will pop up stating "new hardware has been detected".

For PCs:

• Right click on My Computer.

• Click on Manage.

• In the Storage sub-section, click on Disk Management to dis-

play a list of all the drives connected to your computer.

• Left click on Action, select All Tasks and then left click on Cre-

ate Partition.

Rugged, Reliable, Mobile, Secure

REMEMBER, partitioning the drive will require the drive to be formatted

which will result in loss of all data on the hard drive.

• This will bring up the Create Partition Wizard screen.

• Follow the instructions and the drive will be ready for use.

For Macs:

You will be asked to initialize the drives. After initializing the

drive, select the partition tab and select the desired partitions,

then click ok. The new disk(s) will be added to your desktop.

REMEMBER, formatting will result in loss of all data on the hard drive(s).

Fan Failure Alarm

The fan failure alarm function is a standard feature on the DataPort 10

USB-to-SATA. If the cooling fan should fail, an alarm will beep and the

green LED on the upper left corner of the DataPort will ﬂash indicating

fan failure. Removal of the jumper on JP6 will silence the audible alarm

on the frame. Save the jumper to re-install after replacing the fan. Please

contact CRU to obtain a replacement fan.

Power Adapters

If your computer does not have an available Molex/ATX connector

you can purchase a SATA (host)-to-Molex/ATX (device) adapter on our

website.

Product Warranty

CRU-DataPort (CRU) warrants the DataPort 10 USB-to-SATA to be free

of signiﬁcant defects in material and workmanship for a period of one

year from the original date of purchase. CRU's warranty is nontransfer-

able and is limited to the original purchaser.

Limitation of Liability

The warranties set forth in this agreement replace all other warranties. CRU

expressly disclaims all other warranties, including but not limited to, the implied

warranties of merchantability and ﬁtness for a particular purpose and non-in-

fringement of third-party rights with respect to the documentation and hardware.

No CRU dealer, agent or employee is authorized to make any modiﬁcation, exten-

sion, or addition to this warranty. In no event will CRU or its suppliers be liable

for any costs of procurement of substitute products or services, lost proﬁts, loss

of information or data, computer malfunction, or any other special, indirect, con-

sequential, or incidental damages arising in any way out of the sale of, use of,

or inability to use any CRU product or service, even if CRU has been advised of

the possibility of such damages. In no case shall CRU's liability exceed the actual

money paid for the products at issue. CRU reserves the right to make modiﬁca-

tions and additions to this product without notice or taking on additional liability.

1-800-260-9800

A5-010-0003 Rev. 1.1