CRU Dataport FireWire 800 Installatiehandleiding

Blader online of download pdf Installatiehandleiding voor {categorie_naam} CRU Dataport FireWire 800. CRU Dataport FireWire 800 2 pagina's. Usb/esata to sata

Pagina afdrukken

DataPortable 525 FireWire 800

USB/eSATA to SATA

Installation Guide

Step 1. Firmly push the rear tabs in towards the center of the

enclosure. Slide the metal cover off the back of the

enclosure. If you are installing a 5.25" device remove

the front bezel insert.

Step 2. Connect the power and data connector to your SATA

device.

Step 3. For 5.25" devices use the provided screws in the side

mount holes to secure it. For 3.5" devices use the pro-

vided screws in the bottom mount holes to secure it.

Rugged, Reliable, Mobile, Secure

Step 4. Slide the top cover onto the enclosure. Press the rear

tabs out to secure the cover.

Connect the DataPortable 525 to an available FireWire 800, USB,

or eSATA port. No new drivers are required. The hard disk drive

will be found and a window will pop up stating that new hard-

ware has been detected. If the drive has previously been format-

ted the drive will be accessible through My Computer on PCs and

from the desktop on Macs. Please read your host bus adaptor

manual for details on hard drive operation and removal.

If your computer does not have an available eSATA port you may

use the provided SATA host to eSATA Connector Bracket.

1-800-260-9800