Cruise N Comfort HD 12L Handleiding voor installatie en gebruik

Blader online of download pdf Handleiding voor installatie en gebruik voor {categorie_naam} Cruise N Comfort HD 12L. Cruise N Comfort HD 12L 11 pagina's. 12 volt air conditioners
Ook voor Cruise N Comfort HD 12L: Handleiding voor installatie en gebruik (7 pagina's)

Pagina afdrukken

Installation

Locate the area where the unit will be mounted and double check that there are NO

obstructions. Make sure that the location allows for the cold air to return to the units

evaporator.

The unit has 4 large 3/8 " holes punched into the stainless steel plate chassis.

We recommend you through bolt this unit to the floor using at least 3/8 grade #5 bolts with

lock nuts and fender washers. This unit is around 70 lbs very heavy so secure it

accordingly !!!

Find a suitable location for the remote condenser. This condenser is not designed to be in

front of a radiator, it will block the air flow and cause over heating. The remote condenser must be installed so

air can enter the front of the condenser and then is pulled thru the fan. It is a good idea to have the fan toward

the back of the vehicle so when traveling down the road air can easily go thru the condenser. The unit can be

mounted standing up with the large port being higher than the small port and the hose exiting out the side not

the top. Remote condenser can be laid almost flat, always maintain a minimum of a 15 degree angle so that

the large port is always higher than the small.

Installation/Operating Instructions

HD 12/24 L/s 12Volt Air Conditioners

Page