Crux RVCVW-73P Snelstarthandleiding - Pagina 5

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Crux RVCVW-73P. Crux RVCVW-73P 5 pagina's. Rear-view integration system for volkswagen vehicles with premium 8 radios

Pagina afdrukken

RVCVW-73P

REAR-VIEW INTEGRATION

SYSTEM FOR VOLKSWAGEN

VEHICLES WITH PREMIUM 8

RADIOS

APPLICATIONS

VOLKSWAGEN

2011 - UP

Vehicles equiped with this

premium 8 radio

CAMERAS

DIRECT FIT

Bettle

LED, License Plate Style Light

Bettle

Light Bulb, License Plate Style Light

Golf

Light Bulb, License Plate Style Light

Jetta,

Early

2012

Jetta,

Later 2012

Passat

2011 - 2012

Tiguan

Direct Fit Camera Housings may differ on vehicles

within the same model year.

UNIVERSAL

Golden base universal camera w/ 45˚ Screw Type

Product Liability

This unit is installed within the Factory Radio which

requires it to be opened by the Installer.

CRUX Interfacing Solutions shall not be held liable for a

vehicle's electronic components in such case, thereby

it is the responsibility of the installer to verify and conﬁrm

vehicle conﬁguration as to product compatibility prior to

installation. Installer shall be responsible as to all liability

insurance to cover any damage that may arise through

installation. Likewise, CRUX's recommendation of an

installation facility shall not constitute any grounds for

responsibility or liability. Notwithstanding any other

provisions of this disclaimer, CRUX's maximum

combined liability shall be limited to the price paid for

the speciﬁc product that caused the alleged damages.

Step 4

SETTINGS

SETTING THE DIP SWITCHES

Set the dip switches on the interface according to the

functions the interface need to perform.

DIP

ON (Down)

RGB input enabled

RGB input disabled

AVI input enabled

AVI input disabled

AV2 input enabled

AV2 input disabled

RGB resolution = HD

RGB resolution = normal NTSC

Vehicle LCD accepts (480x240)

When using aftermarket

When Vehicle has OEM camera

back-up camera

ON for IR programming

OFF for Normal operation

/ Display calibration

7,8

No Function, OFF position

Step 5

SETTINGS

ADJUSTING THE INTERFACE DISPLAY SETTINGS

Prior to mounting the radio back in its place, turn the system

on and make display adjustment as needed.

The On Screen Display (OSD) menu is accessed and

controlled by the three buttons on the interface.

50 PIN

OSD Menu 1

Access to the adjustment controls for better video quality.

(Contrast / Brightness / Saturation / Sharpness)

Press and release to access OSD Menu 1.

Press and release either button for the

desired adjustment.

To exit, let the menu time out.

OSD Menu 2

Access to the adjustment controls to center the image within

the screen.

Press and release 2 times to access

OSD Menu 2.

Press and release either button for the

desired adjustment.

To exit, let the menu time out.

FUNCTIONALITY

7 8

DIP

SELECTING INPUT SOURCE

USING THE SOURCE SELECT BUTTON

Press and release to switch to the next input.

OFF (UP)

There is a sequence to selecting the desired source.

Reference the "SEQUENCE" portion of this section.

SELECTING INPUT SOURCE

THROUGH STEERING WHEEL CONTROLS

If Right handed steering wheel controls are present,

the return button can also be used to switch between

interface inputs.

Press and release to switch to the next input.

SELECTING INPUT SOURCE

SEQUENCE

Factory Screen > RGB > AV1 > AV2

• This is the sequence of operation for toggling through the

Input sources.

• The interface begins the sequence over after toggling

past AV2.

IMPORTANT

• Camera source will always take priority when the vehicle is

put into reverse.

• When the vehicle is turned off and allowed to power down,

the display will always revert back to "factory screen."

SPECS

CAMERA SPECIFICATIONS

• Lens angle

-170 degrees

• Resolution

- 420 TV lines

• Minimum illumination

- 0.2 Lux

• Voltage

- 12v

• Operation temp.

- (-22ºF to 176ºF)

• NTSC

• Reference lines

• Shutter speed

- 1/60s - 20us

• Waterproof

• Pixels

- 656x492

INTERFACE PARAMETERS

• RGB video amplitude

- 0.7Vpp with 75 ohm impedance

- NTSC resolution (400x240, 480x240)

of navigation is allowed

• Sync amplitude in RGB - navi port

- 3˜5Vpp with 5kK ohm impedance

- Sync should be NTSC composite with

negative polarity

• AV1, AV2, Cam video amplitude

-0.7Vpp with 75 ohm impedance

• AV1, AV2, Cam standar

- NTSC / PAL / SECAM automatic switch

• Normal work power consumption

- 2.4W (0.2A @12V)

• Standby current

- <5mA

• Standby start

- 10 seconds after the user switch off the

CD unit

• Reverse trigger threshold

- >5V trigger