3Com HomeConnect 3CR29221 Installatiehandleiding

Blader online of download pdf Installatiehandleiding voor {categorie_naam} 3Com HomeConnect 3CR29221. 3Com HomeConnect 3CR29221 1 pagina's. Cable modem external with usb

Pagina afdrukken

READ

FIRST!

Installation Guide

Part Number 10038810

Contact your local cable service provider to arrange for

cable Internet access before you begin installation. Please

read the following lists to familiarize yourself with the items

you will need when you install the cable modem.

Macintosh users: Use the "3Com Getting Started Guide"

for installation instructions.

•

Cable modem

•

Cable modem power adapter

•

The "3ComGetting Started Guide"

•

The Cable Connections

•

USB Cable

•

Ethernet Cable

To use the USB port, a PC running Windows 98 or

•

Windows 2000 operating system. At this time, USB

does not support the Macintosh operating system.

You also need an active USB port on your computer.

•

To use the Ethernet port, a PC running Windows 95/

98/2000 operating system, or a Macintosh computer

running System 7.6 (or later) with TCP/IP protocol

installed (see the "Before You Begin" section in the

included "Getting Started Guide" for more information

about installing TCP/IP). You also need an active

Ethernet port or network interface card (NIC)

installed in your computer. To install the modem with a

Macintosh computer, see the "3Com Getting Started

Guide."

•

Pentium processor equivalent (Pentium 166 or higher

recommended).

•

An active two-way cable line.

•

Coaxial cable.

•

An adjustable wrench for securing the cable line to

the modem.

•

Your original Windows 95/98/2000 CD-ROM or

diskettes.

Windows 2000: The Found New Hardware

Wizard screen appears.

A. Select Search for a suitable driver for my

A. Power on the computer.

B. Connect the coaxial cable to the cable

B. Check the CD-ROM drives check box and

modem's CATV cable connector and to the

wall cable outlet.

C. Connect the USB cable to the modem and to

C. When the Found New Hardware Wizard

the computer's USB port.

D. Plug the cable modem's power supply into a

surge protector or into an electrical outlet.

D. Click Yes on the Digital Signature Not

Within a few minutes, the computer detects the

cable modem.

E. When the Found New Hardware Wizard

Note:

you can install the Cable Connections CD, which

When the computer detects the cable modem, insert

contains valuable free software products.

the Cable Connections CD and follow the on-screen

prompts to install the necessary driver files. Follow

the instructions for your operating system.

Windows 98: The Add New Hardware Wizard

When the modem is operating properly, the Link

screen appears.

Status and Power LEDs on the front of the modem

A. Select Search for the best driver for your

are lighted solid. See "Cable Modem Operation" in

device. (Recommended) and click Next .

the "Getting Started Guide" for more information.

B. Check the CD-ROM check box and click

Next to search for the necessary driver files.

C. Select The updated driver (Recommended)

3Com HomeConnect

Cable Modem and

click Next .

D. When Windows locates the driver files, click

Next to automatically install the necessary

files.

E. When prompted, insert the Windows 98 CD

into the CD-ROM drive and click OK .

F. After Windows copies the driver files, click

Finish . The System Settings Change dialog

box appears.

G. Click Yes to reboot your computer.

Note:

After you finish installing the cable modem, you

can install the Cable Connections CD, which contains

valuable free software products.

Before you begin installing the cable modem, you must

decide which setup you want to use. For the easiest

installation, use the

USB

setup. However, if you want to use

multiple computers connected to the modem via a hub, you

must use the Ethernet setup. Be sure to follow the

installation process for the setup you would like to use.

device (recommended) and click Next .

Before installing the cable modem using the

click Next to search for the necessary

Ethernet setup, you must verify that your computer

driver files.

has the correct TCP/IP configuration. Follow the

procedure for your operating system to verify or

displays the search results, click Next to

install the TCP/IP configuration.

install the necessary driver files.

Windows 95/98:

Found screen to continue the installation.

A. Right-click the Network Neighborhood icon on

completes the installation, click Finish .

B. Look for an entry named TCP/IP. If you see

After you finish installing the cable modem,

E. Click OK . You can now go to "Install the

Windows 2000:

A. Right-click the My Network Places icon on

B. Right-click on the Local Area Connection and

A. Power off the computer.

B. Connect the coaxial cable to the cable modem's

CATV cable connector and to the cable outlet.

C. Connect the Ethernet cable to the NIC and to the

cable modem.

D. Plug the cable modem's power adapter into the

cable modem's power jack and into a wall outlet

or surge protector.

E. Power on the computer.

the Windows desktop and click Properties .

Note:

After you finish installing the cable modem, you

TCP/IP listed next to your Ethernet NIC, you

can install the Cable Connections CD, which contains

can now go to "Install the Modem." If TCP/IP is

valuable free software products.

not listed, however, you must complete the

following steps:

1. Click Add .

2. Click Protocol , and click Add .

3. Click Microsoft in the Manufacturers : list

and Click TCP/IP in the Network

Protocols: list.

When the modem is operating properly, the Link

Status and Power LEDs on the front of the modem

Modem."

are lighted a solid color. See "Cable Modem

Operation" in the "Getting Started Guide" for

more information.

the Windows desktop.

click Properties . Look for an entry named

TCP/IP. If you see TCP/IP listed next to your

Ethernet NIC, you can now go to "Connect

the Cable Modem" to install the cable modem.

If TCP/IP is not listed, complete the following

steps:

1. Scroll to the Internet Protocol (TCP/IP)

option.

2. Click to place a check mark in the Internet

Protocol check box.

3. Click OK . You can now go to "Install the

Modem."

trademark, and HomeConnect and Connections are trademarks of 3Com Corporation.

Windows is a registered trademark of Microsoft Corp. Macintosh is a trademark of

Apple Computer, Inc. All other company and product names may be trademarks of

their respective companies.