Dimplex VR20 Handleiding voor installatie en gebruik

Blader online of download pdf Handleiding voor installatie en gebruik voor {categorie_naam} Dimplex VR20. Dimplex VR20 8 pagina's. Quartzray vector range

Pagina afdrukken

Quartzray Vector Range

Models Covered:

Vector I

Vector II

Vector III

Vector IRP

IMPORTANT

WARNING

SPECIFICATIONS

Installation and Operating Instructions

Model

Heating Elements

VR15

VR20

VR30

VR40

VR45

VR60

VR15RP

VR20RP

These instructions should be read and carefully retained by the user.

The installation of these appliances must always be carried out by a competent

electrician and be in accordance with the current IEE wiring regulations and

relevant Building Regulations.

The radiated heat from the heater is considerable and must be taken into

account when siting the heater. Ensure that the heater is not used in close

proximity to the skin or eyes.

Always isolate the heater from the supply before undertaking any maintenance

work of the appliance.

The Vector range of heaters are designed for internal use only. They are not

rated as flame-proof and must not be used when flammable dusts, gases, or

vapours, etc., are likely to be present in the atmosphere. If in doubt, advice

should be sought from the Health and Safety Executive inspectors or local fire

officers.

Quartz lamps are extremely fragile and must be handled with extreme care at all

times. Avoid touching the surface of the quartz sleeve with bare fingers. If the

sleeve is accidentally touched remove the finger print with a soft cloth moistened

with methylated spirits.

As with any fragile fitting mounted above head height, care must be taken when

siting the heater to avoid locations where it may be subjected to knocks. In high

risk areas such as sports halls etc. extra guarding may be required to protect the

heater from flying objects.. If in doubt consult the heater manufacturer.

THIS APPLIANCE MUST BE EAR THED. HEATERS MUST BE

MOUNTED OUT OF REACH FROM OVERHEAD WALKWAYS AND

OPENING WINDOWS. THE HEATER MUST BE SECURELY FIXED AS IT

WILL BE DANGEROUS IN THE EVENT OF ANY INSECURITY IN ITS

FIXINGS.

The Quartzray Vector range is available in 1,2 and 3 lamp models with

outputs of 1.5kW, 2kW, 3.0kW, 4kW, 4.5kW, and 6kW respectively. The Vector

III lamp model is supplied as a dual voltage unit and is suitable for use on 230-

240V 1pH and 400-415V 3N supplies.

Voltage

1 x 1.5kW

230-240V

1 x 2.0kW

230-240V

2 x 1.5kW

230-240V

2 x 2.0kW

230-240V

3 x 1.5kW

230-240V/400-415V 5.8kg

3 x 2.0kW

230-240V/400-415V 5.8kg

1 x 1.5kW

230-240V

1 x 2.0kW

230-240V

8/18149/0

Weight

2.2kg

4.0kg

2.2kg