Pioneer AVG-VDP1 Installatiehandleiding - Pagina 9

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Pioneer AVG-VDP1. Pioneer AVG-VDP1 30 pagina's. Vehicle dynamics processor
Ook voor Pioneer AVG-VDP1: Handmatig (39 pagina's)

Pagina afdrukken

Violet/white

Of the two lead wires connected to the back lamp,

connect the one in which the voltage changes when

the gear shift is in REVERSE (R) position. If not

connected, this unit does not work properly.

Connection method

1. Clamp the lead.

Light green

Used to detect the ON/OFF status of the parking brake.

This lead must be connected to the power supply side of

the parking brake switch.

WARNING:

LIGHT GREEN LEAD AT POWER CONNECTOR IS

DESIGNED TO DETECT PARKED STATUS AND

MUST BE CONNECTED TO THE POWER SUPPLY

SIDE OF THE PARKING BRAKE SWITCH.

IMPROPER CONNECTION OR USE OF THIS LEAD

MAY VIOLATE APPLICABLE LAW AND MAY

RESULT IN SERIOUS INJURY OR DAMAGE.

This unit

Fuse resistor

Power supply side

Ground side

2. Clamp firmly with

needle-nosed pliers.

Parking brake

switch

Note:

• The position of the parking

brake switch depends on the

vehicle model. For details,

consult the vehicle owner's

manual or dealer.