Pioneer AVH-P5750DVD Installatiehandleiding - Pagina 2
Blader online of download pdf Installatiehandleiding voor {categorie_naam} Pioneer AVH-P5750DVD. Pioneer AVH-P5750DVD 8 pagina's. Avh-p5750dvd
Ook voor Pioneer AVH-P5750DVD: Installatiehandleiding (44 pagina's)
Pagina afdrukken
Connecting the Units
Connecting the Units
Connecting the power cord
15cm
IP-BUS input (Blue)
This product
Multi-CD player
(sold separately)
IP-BUS cable
Yellow/black
If you use a cellular telephone, connect it via the
Audio Mute lead on the cellular telephone. If not,
keep the Audio Mute lead free of any connections.
Red
Fuse resistor
To electric terminal controlled
by ignition switch (12 V DC)
ON/OFF.
Violet/white
Of the two lead wires connected to the back lamp, connect the one in which the
voltage changes when the gear shift is in the REVERSE (R) position.
For details, see Fig. 4
Yellow
Fuse holder
To terminal always supplied
with power regardless of
ignition switch position.
Black (ground)
To vehicle (metal) body
.
Gray
White
+
+
Front speaker
≠
≠
Gray/black
White/black
Left
Violet
Green
+
+
Rear speaker
≠
≠
Green/black
Violet/black
Antenna cable
15cm
Connection method
1.
Clamp the lead.
Note:
• The position of the parking brake switch depends
on the vehicle model. For details, consult the
vehicle Owner's Manual or dealer.
Light green
Used to detect the ON/OFF status of the parking brake.
This lead must be connected to the power supply side of the parking
brake switch.
Power supply side
Ground side
Blue/white
To system control terminal of the power amp
or Auto-antenna relay control terminal
(max. 300 mA 12 V DC).
Front speaker
With a 2 speaker system, do not connect anything
Right
to the speaker leads that are not connected to speakers.
When you connect the separately sold multi-channel processor
Rear speaker
(DEQ-P7650) to this unit, do not connect anything to the
speaker leads and system remote control (blue/white).
When connecting to separately sold power amp
This product
2. Clamp firmly with
f
firmly with
needle-nosed
pliers.
Parking brake
switch
Fig. 2
Subwoofer output
or non fading output
(SUBWOOFER OUTPUT or
NON-FADING OUTPUT)
23 cm
Front output
RCA cables
(FRONT OUTPUT)
(sold separately)
15 cm
System remote control
Blue/white
To system control terminal of the power amp
(max. 300 mA 12 V DC).
When you connect the separately sold
Left
multi-channel processor (e.g. DEQ-P7650)
to this unit, do not connect anything to the
speaker leads and system remote control
Front speaker
(blue/white).
Note:
When you connect the multi-channel processor to
this unit, a separately sold power amp must be
Subwoofer
connected to the multi-channel processor.
Note:
Change the initial setting of this product
(refer to the Operation Manual).
The subwoofer output of this unit is monaural.
<ENGLISH>
<ENGLISH>
Power amp
(sold separately)
Power amp
(sold separately)
Right
+
+
Front speaker
≠
≠
+
+
Subwoofer
≠
≠
Perform these connections when using
the optional amplifier.
Fig. 3