Pioneer DEH-4300UB Gebruikershandleiding - Pagina 4

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Pioneer DEH-4300UB. Pioneer DEH-4300UB 49 pagina's. Cd rds receiver
Ook voor Pioneer DEH-4300UB: Gebruikershandleiding (17 pagina's)

Pagina afdrukken

Pioneer DEH-4300UB Gebruikershandleiding

Section

Operating this unit

Turning the unit off

1 Press S (SRC/OFF) and hold until the unit turns

off.

Selecting a source

1 Press S (SRC/OFF) to cycle between:

TUNER (tuner)—CD (built-in CD player)—USB

(USB)/iPod (iPod)—AUX (AUX)

Adjusting the volume

1 Turn M.C. to adjust volume.

CAUTION

For safety reasons, park your vehicle when remov-

ing the front panel.

Note

When this unit's blue/white lead is connected to

the vehicle's auto-antenna relay control terminal,

the vehicle's antenna extends when this unit's

source is turned on. To retract the antenna, turn

the source off.

Use and care of the remote

control

Using the remote control

1 Point the remote control in the direction of the

front panel to operate.

When using for the first time, pull out the film

protruding from the tray.

Replacing the battery

1 Slide the tray out on the back of the remote con-

trol.

2 Insert the battery with the plus (+) and minus (–)

poles aligned properly.

WARNING

! Keep the battery out of the reach of children.

Should the battery be swallowed, consult a

doctor immediately.

! Batteries (battery pack or batteries installed)

must not be exposed to excessive heat such

as sunshine, fire or the like.

CAUTION

! Use one CR2025 (3 V) lithium battery.

! Remove the battery if the remote control is not

used for a month or longer.

! There is a danger of explosion if the battery is

incorrectly replaced. Replace only with the

same or equivalent type.

! Do not handle the battery with metallic tools.

! Do not store the battery with metallic objects.

! If the battery leaks, wipe the remote control

completely clean and install a new battery.

! When disposing of used batteries, comply

with governmental regulations or environmen-

tal public institutions' rules that apply in your

country/area.

! "Perchlorate Material – special handling may

apply.

See www.dtsc.ca.gov/hazardouswaste/

perchlorate. (Applicable to California, U.S.A.)"

Important

! Do not store the remote control in high tem-

peratures or direct sunlight.

! The remote control may not function properly

in direct sunlight.

! Do not let the remote control fall onto the

floor, where it may become jammed under the

brake or accelerator pedal.

Menu operations identical

for function settings/audio

adjustments/initial

settings/lists

Returning to the previous display

Returning to the previous list (the folder one level

higher)

1 Press

Returning to the main menu

Returning to the top tier of list

1 Press and hold

Operating this unit

Returning to the ordinary display

Canceling the initial setting menu

1 Press B (BAND/ESC).

Returning to the ordinary display from the list

1 Press B (BAND/ESC).

Tuner

Basic Operations

Selecting a band

1 Press B (BAND/ESC) until the desired band (F1,

F2, F3 for FM or AM) is displayed.

Manual tuning (step by step)

1 Press c or d.

Seeking

1 Press and hold c or d, and then release.

You can cancel seek tuning by briefly pressing c

or d.

While pressing and holding c or d, you can skip

stations. Seek tuning starts as soon as you re-

lease c or d.

Storing and recalling stations

for each band

Using preset tuning buttons

When you find a station that you want

to store in memory, press one of the preset

tuning buttons (1 to 6) and hold until the

preset number stops flashing.

Press one of the preset tuning buttons

(1 to 6) to select the desired station.

# You can also recall stored radio stations by

pressing a or b during the frequency display.

Switching the display

Selecting the desired text information

1 Press

Program service name—song title—artist name

Scrolling the song title/artist name information to the

left

1 Press and hold

Note

Depending on the area, you cannot switch the

display.

Function settings

Press M.C. to display the main menu.

Turn M.C. to change the menu option

and press to select FUNCTION.

Turn M.C. to select the function.

After selecting, perform the following proce-

dures to set the function.

BSM (best stations memory)

BSM (best stations memory) automatically stores the

six strongest stations in the order of their signal

strength.

1 Press M.C. to turn BSM on.

To cancel, press M.C. again.

LOCAL (local seek tuning)

Local seek tuning lets you tune in to only those radio

stations with sufficiently strong signals for good re-

ception.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the desired setting.

FM: OFF—LEVEL 1—LEVEL 2—LEVEL 3—LEVEL

AM: OFF—LEVEL 1—LEVEL 2

The highest level setting allows reception of only

the strongest stations, while lower levels allow the

reception of weaker stations.

3 Press M.C. to confirm the selection.

Section