Pioneer DEH-4600BT Bedieningshandleiding - Pagina 6

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Pioneer DEH-4600BT. Pioneer DEH-4600BT 37 pagina's. Cd rds receiver
Ook voor Pioneer DEH-4600BT: Installatiehandleiding (33 pagina's)

Pagina afdrukken

Pioneer DEH-4600BT Bedieningshandleiding

Section

Using this unit

Storing and recalling stations

for each band

Using preset tuning buttons

To store: Press and hold down one of

the preset tuning buttons (1/

until the number stops flashing.

To recall: Press one of the preset tuning

buttons (1/

to 6/

Switching the display

Selecting the desired text information

1 Press DISP to cycle between the following:

! FREQUENCY (program service name or fre-

quency)

! BRDCST INFO (program service name/PTY in-

formation)

! CLOCK (source name and clock)

Notes

! If the program service name cannot be ac-

quired in FREQUENCY, the broadcast fre-

quency is displayed instead. If the program

service name is detected, the program service

name will be displayed.

! Depending on the band, text information can

be changed.

! Text information items that can be changed

depend on the area.

Using PTY functions

You can tune in to a station using PTY (pro-

gram type) information.

to 6/

)

Searching for an RDS station by PTY information

1 Press

(list).

2 Turn M.C. to select a program type.

NEWS/INFO—POPULAR—CLASSICS—OTHERS

3 Press M.C. to begin the search.

The unit searches for a station broadcasting that

type of program. When a station is found, its pro-

gram service name is displayed.

! To cancel the search, press M.C. again.

! The program of some stations may differ from

that indicated by the transmitted PTY.

! If no station is broadcasting the type of pro-

gram you searched for, NOT FOUND is dis-

played for about two seconds and then the

tuner returns to the original station.

PTY list

For more details about PTY list, visit the follow-

ing site:

http://www.pioneer.eu/eur/products/25/121/

tech/CarAudio/PTY.html

Function settings

Press M.C. to display the main menu.

Turn M.C. to change the menu option

and press to select FUNCTION.

Turn M.C. to select the function.

Once selected, the following functions can be

adjusted.

# If MW/LW band is selected, only BSM, LOCAL

and SEEK are available.

FM SETTING (FM sound quality settings)

The sound quality level can be set to match the broad-

cast signal conditions of the FM band signal.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the desired setting.

! STANDARD – This is the standard setting.

! HI-FI – This is the setting to use to prioritize

the high quality of stereo sound.

! STABLE – This is the setting to use to prioritize

the low noise of monaural sound.

BSM (best stations memory)