Pioneer DEH-6400BT Bedieningshandleiding - Pagina 17

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Pioneer DEH-6400BT. Pioneer DEH-6400BT 36 pagina's. Cd rds receiver
Ook voor Pioneer DEH-6400BT: Gebruikershandleiding (25 pagina's), Snelstarthandleiding (8 pagina's)

Pagina afdrukken

Pioneer DEH-6400BT Bedieningshandleiding

Operating this unit

Canceling call waiting

1 Press PHONE.

Adjusting the other party's listening volume

1 Turn LEVER while talking on the phone.

! When private mode is on, this function is not

available.

Turning private mode on or off

1 Press BAND/

while talking on the phone.

Switching the information display

1 Press

/DISP while talking on the phone.

Notes

! If private mode is selected on the cellular

phone, hands-free phoning may not be avail-

able.

! The estimated call time appears in the display

(this may differ slightly from the actual call

time).

Connection menu operation

Important

! Be sure to park your vehicle in a safe place

and apply the parking brake when performing

this operation.

! Connected devices may not operate properly if

more than one Bluetooth device is connected

at a time (e.g. a phone and a separate audio

player are connected simultaneously).

Press and hold PHONE to display the

connection menu.

# You cannot operate this step during a call.

Turn M.C. to select the function.

After selecting, perform the following proce-

dures to set the function.

Device list (connecting or disconnecting a device

from the device list)

! When no device is selected in the device list, this

function is not available.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the name of a device you want

to connect/disconnect.

! Press and hold M.C. to switch the Bluetooth

device address and device name.

3 Press M.C. to connect/disconnect the selected de-

vice.

Once the connection is established, Connected

is displayed.

Delete device (deleting a device from the device list)

! When no device is selected in the device list, this

function is not available.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the name of a device you want

to delete.

! Press and hold M.C. to switch the Bluetooth

device address and device name.

3 Press M.C. to display Delete YES.

4 Press M.C. to delete a device information from

the device list.

! While this function is in use, do not turn off the

engine.

Add device (connecting a new device)

1 Press M.C. to start searching.

! To cancel, press M.C. while searching.

! If this unit fails to find any available cellular

phones, Not found is displayed.

2 Turn M.C. to select a device from the device list.

! Press and hold M.C. to switch the Bluetooth

device address and device name.

3 Press M.C. to connect the selected device.

! To complete the connection, check the device

name (Pioneer BT Unit). Enter the PIN code

on your device if necessary.

! PIN code is set to 0000 as the default. You

can change this code.

! 6-digit number appears on the display of this

unit. Once the connection is established, this

number disappears.

! If you are unable to complete the connection

using this unit, use the device to connect to

the unit.

! If three devices are already paired, Device Full

is displayed and it is not possible to perform

this operation. In this case, delete a paired de-

vice first.

Section