Pioneer DEH-P7000BT XN Installatiehandleiding - Pagina 2
Blader online of download pdf Installatiehandleiding voor {categorie_naam} Pioneer DEH-P7000BT XN. Pioneer DEH-P7000BT XN 7 pagina's. Pioneer deh-p7000bt: install guide
Ook voor Pioneer DEH-P7000BT XN: Snelstarthandleiding (6 pagina's)
Pagina afdrukken
Connecting the unit
English
When not connecting a rear speaker lead to a subwoofer
Microphone input
20 cm
(7-7/8 in.)
1.5 m (4 ft. 9 in.)
15 cm
(5-7/8 in.)
USB cable
AUX jack (3.5 φ)
Connect to separately sold USB device.
Use a stereo mini plug
This product
Rear output
cable to connect with
auxiliary device.
Front output
Wired remote input
Hard-wired remote control
Antenna jack
adaptor can be connected
Subwoofer output
(sold separately).
IP-BUS input (Blue)
Multi-CD player
Fuse (10 A)
IP-BUS cable
(sold separately)
Yellow
Connect to the constant 12 V supply terminal.
Fuse resister
Yellow/black
If you use an equipment with Mute function,
Red
wire this lead to the Audio Mute lead on that
Connect to terminal controlled by
equipment. If not, keep the Audio Mute lead
ignition switch (12 V DC).
free of any connections.
Black (chassis ground)
Connect to a clean, paint-free metal location.
With a 2 speaker system, do not
connect anything to the speaker leads
that are not connected to speakers.
White
Gray
Front speaker
Front speaker
White/black
Gray/black
Left
Green
Violet
Rear speaker
Rear speaker
Green/black
Violet/black
When connecting speakers without using the internal
amplifier, we recommend that this unit's internal amp is
turned off. For more details, refer to operation manual.
Connecting the unit
4 m (13 ft. 1 in.)
Microphone
To rear output
Connect with RCA cables
(sold separately)
To front output
Power amp
(sold separately)
To subwoofer
output
System remote control
Blue/white
Connect to system control terminal of the power
amp or auto-antenna relay control terminal (max.
300 mA 12 V DC).
Perform these connections
when using the optional
amplifier.
Subwoofer
Subwoofer
Right
Front speaker
Rear speaker
English
Connecting the unit
When using a subwoofer without using the optional amplifier
Power amp
(sold separately)
Power amp
(sold separately)
Yellow/black
If you use an equipment with Mute function, wire this lead to the Audio
Mute lead on that equipment. If not, keep the Audio Mute lead free of
any connections.
Yellow
Connect to the constant 12 V supply terminal.
Red
Connect to terminal controlled by ignition switch (12 V DC).
Black (chassis ground)
Front speaker
Connect to a clean, paint-free metal location.
Note:
Change the initial setting of this unit.
Rear speaker
The subwoofer output of this unit is monaural.
English
Connecting the unit
20 cm
Microphone input
(7-7/8 in.)
1.5 m (4 ft. 9 in.)
15 cm
(5-7/8 in.)
USB cable
AUX jack (3.5 φ)
Connect to separately sold USB device.
Use a stereo mini plug
This product
Rear output
cable to connect with
auxiliary device.
Front output
Wired remote input
Hard-wired remote control
Antenna jack
adaptor can be connected
Subwoofer output
(sold separately).
IP-BUS input (Blue)
Multi-CD player
IP-BUS cable
(sold separately)
Front speaker
Fuse (10 A)
Left
Subwoofer (4 Ω)
Fuse resister
Not used.
English
4 m (13 ft. 1 in.)
Microphone
Blue/white
Connect to system control
terminal of the power amp or
auto-antenna relay control
terminal (max. 300 mA 12 V DC).
White
Gray
Front speaker
White/black
Gray/black
Right
Green
Violet
Subwoofer (4 Ω)
Green/black
Violet/black
When using a subwoofer of 70 W (2 Ω), be sure to connect
with Violet and Violet/black leads of this unit.
Do not connect anything with Green and Green/black leads.
Green
Violet
Subwoofer
(4 Ω) 2
Green/black
Violet/black