Pioneer SPH-10BT Bedieningshandleiding - Pagina 28
Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Pioneer SPH-10BT. Pioneer SPH-10BT 35 pagina's. Smartphone receiver
Ook voor Pioneer SPH-10BT: Installatiehandleiding (33 pagina's), Instructies voor firmware-update (4 pagina's), Instructies voor firmware-update (6 pagina's), Instructies voor bijwerken van systeemfirmware (7 pagina's)
Pagina afdrukken
HUB ERR
→ The USB device connected via a USB
hub is not supported by this unit.
– Connect the USB device directly to this
unit using a USB cable.
CHECKUSB
→ The USB connector or USB cable has
short-circuited.
– Check that the USB connector or USB
cable is not caught in something or
damaged.
→ The connected USB device consumes
more than maximum allowable current.
– Disconnect the USB device and do not
use it. Turn the ignition switch OFF
and back to ACC or ON. Connect only
compliant USB devices.
ERROR-19
→ Communication failed.
– Perform one of the following
operations, then return to the USB
source.
• Disconnect the USB device.
• Change to a different source.
→ iPhone failure.
– Disconnect the cable from the iPhone.
Once the iPhone's main menu is
displayed, reconnect the iPhone and
reset it.
ERROR-23
→ USB device was not formatted properly.
– Format the USB device with FAT12,
FAT16 or FAT32.
ERROR-16
→ The iPhone firmware version is old.
– Update the iPhone version.
→ iPhone failure.
– Disconnect the cable from the iPhone.
Once the iPhone's main menu is
displayed, reconnect the iPhone and
reset it.
STOP
→ There are no songs in the current list.
– Select a list that contains songs.
NO DEV
→ No Bluetooth device found.
– Connect the unit and iPhone via
Bluetooth (page 14).
CN FAIL
→ Bluetooth connection with iPhone
failed.
– Make a connection again on the
mobile device.
DISCNCT
→ Bluetooth connection lost.
– Make a connection again on the
mobile device.
Bluetooth device
ERROR-10
→ The power failed for the Bluetooth
module of the unit.
– Turn the ignition switch OFF and back
to ACC or ON.
APP
CNCT APP
→ Pioneer Smart Sync connection is not
made.
– Make a connection with Pioneer Smart
Sync (page 17).
Handling guidelines
USB storage device
• Connections via USB hubs are not
supported.
• Firmly secure the USB storage device
before driving. Do not let the USB storage
device fall onto the floor, where it may
- 28 -