Pioneer X-HM51DAB-K Gebruiksaanwijzing - Pagina 11

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Pioneer X-HM51DAB-K. Pioneer X-HM51DAB-K 44 pagina's. Cd receiver
Ook voor Pioneer X-HM51DAB-K: Gebruiksaanwijzing (44 pagina's)

Pagina afdrukken

Connections

Chapter 3:

Connections

CAUTION

• Be sure to turn off the power and unplug the power cord

from the power outlet whenever making or changing

connections.

• Connect the power cord after all the connections

between devices have been completed.

Speaker connection (X-HM51DAB

only)

• The provided speaker wire with the red tube is for the (+)

terminal. Connect the wire with red tube the (+)

terminal, and other wire to the (–) terminal.

Right speaker

SPEAKERS

This unit's rear panel

CAUTION

• These speaker terminals carry HAZARDOUS LIVE

voltage. To prevent the risk of electric shock when

connecting or disconnecting the speaker cables,

disconnect the power cord before touching any

uninsulated parts.

• Make sure that the speaker cable cores do not become

exposed and make contact with other cable cores. This

may cause malfunction of the product.

Left speaker

SUBWOOFER

PREOUT

Red tube

X-HM51DAB

Supplied

speaker wire

• Do not allow the speaker cable core to come into contact

with the receiver body.

- If the speaker cable core comes into contact with any

metal portion of the receiver's body, it may damage the

speakers and cause smoke and fire.

Insert speaker cables securely into the terminals and

check that the cable does not come out of easily.

X-HM51DAB only

• Do not connect any speakers other than those supplied

to this system.

• Do not connect the supplied speakers to any amplifier

other than the one supplied with this system.

Connection to any other amplifier may result in

malfunction or fire.

• Do not attach these speakers to the wall or ceiling. They

may fall off and cause injury.

• These speakers are magnetically shielded. However,

depending on the installation location, color distortion

may occur if the speaker system is installed extremely

close to the screen of a television set. If this happens,

turn off the television set, and then turn it on after 15 to

30 minutes. If the problem persists, move the speaker

system away from the television set.

XC-HM51DAB only

• You can use speakers with a nominal impedance

between 4  and 16 .

Note

• There is no difference between L and R speakers.

Cleaning the glossy finish of the speaker (X-

HM51DAB only)

• If you use a dusty or hard cloth or if you rub the screen

hard, the finish of the product will be scratched.

• If you clean the surface of the speaker system with a wet

cloth, water droplets on the surface may enter into the

product, resulting in malfunction.

• When cleaning the finish of the speaker system, gently

wipe it with a dry soft cloth.