Pioneer XDV-P6 - DVD Changer - in-dash Installatiehandleiding - Pagina 3
Blader online of download pdf Installatiehandleiding voor {categorie_naam} Pioneer XDV-P6 - DVD Changer - in-dash. Pioneer XDV-P6 - DVD Changer - in-dash 5 pagina's. Other manual
Ook voor Pioneer XDV-P6 - DVD Changer - in-dash: Installatiehandleiding (9 pagina's)
Connecting the Units
When Connecting the Head Unit
WARNING
• NEVER install the display in a location that enables the Driver to watch the DVD or
Video CD while Driving.
• NEVER connect audio output (AUDIO OUT) to sold separately power amp.
Head Unit
6 m
IP-BUS cable (supplied)
(sold separately)
Blue
Yellow (front video output)
Hide-away unit
Black
IP BUS
STAND ALONE
9 cm
This product
Black
Not used.
RCA cable (supplied)
Black
2.7 m
6 m
25 pin cable (supplied)
Depending on where you install,
this cable is not used.
To video input
Display with RCA
input jacks
When Using a Display Connected Rear Video Output
This product's rear video output is for connection of a display to enable passengers in the
rear seats to watch the DVD or Video CD.
WARNING
• NEVER install the display in a location that enables the Driver to watch the DVD or
Video CD while Driving.
• NEVER connect audio output (AUDIO OUT) to sold separately power amp.
Yellow (rear video output)
Hide-away unit
White (audio output (Left))
Red (audio output (Right))
IP BUS
STAND ALONE
9 cm
Not used.
RCA cable (supplied)
6 m
20 cm
25 pin cable (supplied)
Depending on where you install,
this cable is not used.
To video input
To audio inputs
Display with RCA
input jacks
Connecting the Power Cord
Hide-away unit
This product
Black
20 cm
Black
2.7 m
<ENGLISH>
Red
When using this product in STAND ALONE
Fuse resistor
mode, connect this cord to electric terminal
controlled by ignition switch (12 V DC) ON/OFF.
When using this product in IP BUS mode,
do not connect this cord.
Orange/white
To lighting switch terminal.
Fuse resistor
Yello
Y
Yello
w
To terminal always supplied with power
Fuse holder
regardless of ignition switch position.
(4 A)
Black (ground)
To vehicle (metal) body.