Pioneer AVIC-F80DAB Installatiehandleiding - Pagina 24

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Pioneer AVIC-F80DAB. Pioneer AVIC-F80DAB 32 pagina's. Navigation av system
Ook voor Pioneer AVIC-F80DAB: Snelstarthandleiding (16 pagina's), Instructies voor bijwerken van systeemfirmware (5 pagina's)

Pioneer AVIC-F80DAB Installatiehandleiding
Section
03
Installation
! Before making a final installation of this
product, temporarily connect the wiring to
confirm that the connections are correct
and the system works properly.

For AVIC-F80DAB users

Do not install this product in a position where
the opening of the LCD panel is obstructed by
any obstacles, such as the gearstick. Before
installing this product, be sure to leave suffi-
cient space so that the LCD panel does not ob-
struct the gearstick when it is fully opened.
This may cause interference with the gear-
stick, or a malfunction of the mechanism of
this product.

Installing this product

Installation notes

! Do not install this product in places subject
to high temperatures or humidity, such as:
— Places close to a heater, vent or air con-
ditioner.
— Places exposed to direct sunlight, such
as on top of the dashboard.
— Places that may be exposed to rain,
such as close to the door or on the vehi-
cle's floor.
! Install this product in an area strong en-
ough to bear its weight. Choose a position
where this product can be firmly installed,
and install it securely. If this product is not
securely installed, the current location of
the vehicle cannot be displayed correctly.
24
Engb
! Install this product horizontally on a sur-
face within 0 to 30 degrees tolerance (with-
in 5 degrees to the left or right). Improper
installation of the product with the surface
tilted more than these tolerances increases
the potential for errors in the vehicle's loca-
tion display, and might otherwise cause re-
duced display performance.
30°
! When installing, to ensure proper heat dis-
persal when using this product, make sure
you leave ample space behind the rear
panel and wrap any loose cables so they
are not blocking the vents.
Leave ample
5 cm
space
5 cm