Pioneer DEH-X1650UB Gebruikershandleiding - Pagina 11

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Pioneer DEH-X1650UB. Pioneer DEH-X1650UB 48 pagina's. Cd rds receiver

Pagina afdrukken

Additional information

Troubleshooting

Symptoms are written in bold and causes in reg-

ular, non-indented text. Regular, indented text is

used to indicate actions to be taken.

The display automatically returns to the ordinary

display.

You did not perform any operation within about 30

seconds.

Perform operation again.

The repeat play range changes unexpectedly.

Depending on the repeat play range, the selected

range may change when another folder or track is

being selected or during fast forwarding/reversing.

Select the repeat play range again.

A subfolder is not played back.

Subfolders cannot be played when FLD (folder re-

peat) is selected.

Select another repeat play range.

NO XXXX appears when a display is changed

(NO TITLE, for example).

There is no embedded text information.

Switch the display or play another track/file.

The unit is malfunctioning.

There is interference.

You are using a device, such as a cellular phone,

that may cause audible interference.

Move electrical devices that may be causing the

interference away from the unit.

Error messages

When you contact your dealer or your nearest

Pioneer Service Center, be sure to note the error

message.

Symptoms are written in bold and causes in reg-

ular, non-indented text. Regular, indented text is

used to indicate actions to be taken.

Common

AMP ERROR

This unit fails to operate or the speaker connection is

incorrect; the protective circuit is activated.

Check the speaker connection. If the message

fails to disappear even after the engine is

switched off/on, contact your dealer or an

authorized Pioneer Service Station for

assistance.

CD player

ERROR-07, 11, 12, 17, 30

The disc is dirty.

Clean the disc.

The disc is scratched.

Replace the disc.

ERROR-07, 10, 11, 12, 15, 17, 30, A0

There is an electrical or mechanical error.

Turn the ignition switch OFF and back ON, or

switch to a different source, then back to the CD

player.

ERROR-15

The inserted disc is blank.

Replace the disc.

ERROR-23

Unsupported CD format.

Replace the disc.

Additional information

FORMAT READ

Sometimes there is a delay between the start of play-

back and when you start to hear any sound.

Wait until the message disappears and you hear

sound.

NO AUDIO

The inserted disc does not contain any playable files.

Replace the disc.

SKIPPED

The inserted disc contains DRM protected files.

The protected files are skipped.

PROTECT

All the files on the inserted disc are embedded with

DRM.

Replace the disc.

USB storage device

FORMAT READ

Sometimes there is a delay between the start of play-

back and when you start to hear any sound.

Wait until the message disappears and you hear

sound.

NO AUDIO

There are no songs.

Transfer the audio files to the USB storage device

and connect.

The connected USB storage device has security en-

abled.

Follow the USB storage device instructions to

disable the security.

SKIPPED

The connected USB storage device contains DRM

protected files.

The protected files are skipped.

PROTECT

All the files on the connected USB storage device

are embedded with DRM.

Replace the USB storage device.

N/A USB

The connected USB device is not supported by this

unit.

! Connect a USB Mass Storage Class compliant

device.

! Disconnect your device and replace it with a

compatible USB storage device.

CHECK USB

The USB connector or USB cable has short-

circuited.

Check that the USB connector or USB cable is

not caught in something or damaged.

The connected USB storage device consumes more

than maximum allowable current.

Disconnect the USB storage device and do not

use it. Turn the ignition switch to OFF, then to

ACC or ON and then connect only compliant

USB storage devices.

ERROR-19

Communication failed.

Perform one of the following operations.

–Turn the ignition switch OFF and back ON.

–Disconnect the USB storage device.

–Change to a different source.

Then, return to the USB source.

ERROR-23

USB storage device was not formatted with FAT12,

FAT16 or FAT32.

USB storage device should be formatted with

FAT12, FAT16 or FAT32.

Appendix