Pioneer VSX-C301 Gebruiksaanwijzing - Pagina 22
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Pioneer VSX-C301. Pioneer VSX-C301 40 pagina's. Audio video multi-channel receiver
Ook voor Pioneer VSX-C301: Gebruiksaanwijzing (44 pagina's)
Pagina afdrukken
05
Getting started
Playing a source
Here are the basic instructions for playing a source (such
as a DVD disc) with your home theater system.
STANDBY/ON
1
Turn on the power of the playback component
(for example a DVD player), your TV and subwoofer
(if you have one).
• If your source is the TV's built-in tuner, then switch to
the channel you want to watch, otherwise make sure
that the TV's video input is set to this receiver. (For
example, if you connected this receiver to the VIDEO
1 jacks on your TV, make sure that VIDEO 1 input is
now selected.)
2
If the receiver isn't already on, press
RECEIVER to switch it on.
3
Change the receiver input to the source you
want to play.
You can use the front panel INPUT SELECTOR knob or
the INPUT button on the remote.
When the Direct function (see Remote Direct function on
page 33) is ON (the default setting), you can also use the
DVD, TV/SAT, DVR/VCR, FRONT or FM/AM buttons on
the remote control to select the receiver input.
4
Start playback of the DVD (or other component).
If you're playing a Dolby Digital or DTS surround sound
DVD disc, you should hear surround sound. If you are
playing a stereo source, you will only hear sound from the
front left/right speakers in the default listening mode.
• See also Home theater sound on page 23 for more
information on different ways of listening to sources.
22
En
RECEIVER
RECEIVER
SLEEP
DVD
TV/SAT
DVR/VCR
AV DIRECT
INPUT
FRONT
FM/AM
TEST TONE
LEVEL
CH SELECT
ADVANCED
AUTO
STEREO
SURROUND
SURROUND
SOUND
SIGNAL
MODE
DIALOG
SELECT
MUTE
MASTER
VOLUME
ROOM
SYSTEM
SETUP
SETUP
TUNE
DTV MENU
T.EDIT
TOP MENU
MENU
ST
ST
ENTER
GUIDE
SEARCH
SUBTITLE
AUDIO
TUNE
VIRTUAL SB
EON RETURN
BAND
RF ATT
A
DISPLAY
CLASS
MPX
D.ACCESS
B
C
D
E
DISC
ENTER
10
TV CONTROL
CHANNEL
INPUT
CHANNEL
VOLUME
RECEIVER
MASTER
INPUT SELECTOR
VOLUME
DOWN
UP
5
Use MASTER VOLUME (front panel or remote) to
adjust the volume level.
• Turn down the volume of your TV so that all the sound
is coming from the speakers connected to this
receiver.
Note
• If you need to change the input signal type from
digital to analog, press SIGNAL SELECT (see also
Selecting the input signal type on page 27).
• For more detailed surround sound setup, see The
System Setup menu on page 29.