Pioneer VSX-D601 Gebruiksaanwijzing - Pagina 24

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Pioneer VSX-D601. Pioneer VSX-D601 41 pagina's. Audio/video stereo receiver

Pagina afdrukken
RECORDING WITH A CASSETTE DECK
RECORDING WITH TAPE 1/DAT
|
If the TAPE 2 MONITOR button is ON, press to turn OFF.
1. Select the source
you want
to record from with the INPUT
SELECTOR buttons.
2 When
recording to AM
or FM broadcasts, press the desired
STATION CALL button if the station has been preset. if the desired
station has not been preset, tune in the station using Auto, Manual
or Direct Access tuning.
2. Start recording on TAPE 1/DAT cassette deck {or DAT deck).
3. Play the desired program source (record, compact disc, etc.).
¢ The volume, balance and tone controls have no effect on the
recording.
1. Select the source you want to record from with the INPUT
SELECTOR buttons.
2. Start recording on the TAPE 2 cassette deck.
3. Play the desired program source (record, compact disc, atc.).
VIDEO RECORDING
| USING VCR 1, VCR 2 FOR AUDIO RECORDING
The audio signal output from the VCR 1 and VCR 2 AUDIO REC jacks
is the same as that output frorn the TAPE 1/DAT REC jacks, so you
can record using the same procedure as for recording with TAPE 1/DAT.
The following operation concerns TAPE 1 to TAPE 2 copying. TAPE 2
to TAPE
1 copying is not possible.
1. Press the TAPE 1/DAT INPUT SELECTOR button.
2. Load the TAPE 1/DAT cassette deck {or DAT deck) with a tape
to playback.
3. Load the TAPE 2 cassette deck with a tape to record to.
4. Start recording on the TAPE 2 cassette deck.
6. Start playback on the TAPE 1/DAT cassette deck {or DAT deck).
Tape monitoring
When
recording
is performed
on a cassette deck equipped
with
monitoring function, the recorded sound can be monitored through the
speaker system by pressing the TAPE 2 MONITOR button to ON.
Refer to the connection procedures on pages 7 to 13 and refer to the
VCR's Operating Instructions regarding proper operation procedures.
Recording can be performed on both VCR 1 and VCR 2.
24
< ARBI380>
En
1. Select the source to record from with the INPUT SELECTOR
buttons.
#" When recording from a LaserDisc on VCR 1 or VCR 2 —
LD
* When recording on VCR1
or VCR2 from the TV tuner —
TV
® When recording fram VCR 1 on VCR 2 — VCR 1
e When recording from VCR 2 on VCR 1 — VCR 2
IVSX-D701S
only]
* When recording on VCR 1 or VCR2 fram a component connected ;
to the front panel VIDEO INPUT jacks —
VIDEO
2. Begin recording on the VCR.
* For VCR, select a fine input (external input)
3. Begin playback
on the component
selected with the INPUT
SELECTOR.