Pioneer VSX-D601 Gebruiksaanwijzing - Pagina 27

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Pioneer VSX-D601. Pioneer VSX-D601 41 pagina's. Audio/video stereo receiver

Pagina afdrukken

1. Specifications

USING THE AUTO SOURCE CONTROL

You can memorize receiver settings, and recall at the touch of a button.

Two memary buttons are available.

If you connect a component bearing the Pioneer gg] mark, such as a

CD player, to the CONTROL OUT jack on the rear panel, signals can

also be transmitted to automatically switch on power and start play of

that component.

NOTE:

With some components, even if they bear the I mark, power cannot

be switched on and off by remote control.

[Operating Memory]

1. Select the settings on the receiver you want to memorize.

2. Press the MEMORY button.

the display, "MEMORY"

appears and flashes.

3. Press the AUTO SOURCE CONTROL button (1 or 2) you want to

use for memorizing.

2 MEMORY

3 AUTO SOURCE CONTROL (1, 2}

Example:

Using the AUTO SOURCE CONTROL

1 button to memorize settings

to start play on a CD player connected to the receiver's CONTROL OUT

jack.

1. Set the receiver INPUT SELECTOR to CD.

2. Adjust tone, surround, and other parameters to the settings you

want to memorize.

3. Set the volume to the level you want to memorize.

4. Press the MEMORY button.

5. Press the AUTO SOURCE CONTROL 1 button.

[Recalling]

Press the AUTO SOURCE CONTROL button (1 or 2) for the settings

you want to recall.

Remote contral AUTO SOURCE CONTROL buttons (1 or 2) can also

be used to recall settings.

"AUTO SOURCE CONTROL 1 (or 2)" is scroll displayed. After the last

indication, such as PLAY CD" has been scroll displayed, the display

switches to function indications.

In the case of the example, the following operations are performed.

@ Press the AUTO SOURCE CONTROL 1 button.

@ Power to the receiver switches ON, the INPUT SELECTOR selects

CD, settings for such parameters as surround, and tone are called

up, and power to the CD player is switched ON.

@) Play starts on the CD player.

@ Volume level is raised by the MASTER VOLUME on the receiver.

NOTE:

* Memorized volume level and recali volume level may differ by a small

amount.

® ff volume is near minimum level when memorized, volume may not

tise when the setting is recalled.

NOTE:

* Since the power ON and play signals for components bearing the

mark called by Auto source controi are output thraugh this unit's

CONTROL OUT jack, be sure to connect the control cord (refer to

page 15).

*® With some components, even if they bear the i mark, power cannot

be switched on and aff by remate control, If this is the case, by

connecting the other unit's power cord to this unit's SWITCHED AC

OUTLET,

and jeaving the other unit's power switch ON, pawer

switching will depend on whether this unit is on or off.

® Volume level can not be raised above the center setting.

® AUTO SOURCE CONTROL memory stores the receiver settings at

that point in time; it does not memorize STATION CALL numbers

{7-30},

CUSTOM

MEMORY,

or ACGUSTIC

MEMORY

(A~E,

LOUDNESS, FLAT).

@ During the operation of AUTO SOURCE CONTROL, ather components

are also being controlled, so de not pertorm other aperations until it

is finished.

With auto source contro!, power ON/OFF signals and play signals are

output from the CONTROL OUT jack at the times shown in the following

chart.

Function at the time

POWER signal

of memorizing

PHONO

TUNER

TAPE 1

TAPE 2

Yes (VCR PLAY, TV

VCR 1

Yes (VCR, TV}

FUNC VLD'

(VCR PLAY, TV

VCR 2

Yes (VCR,

TV}

FUNC LO')

Yes (LD PLAY, TV

Yes (LB, TV)

FUNC LD")

Yes (TV)

(TY FUNC "TV

Yes (VCR PLAY,

VIDEO

Yes (VCR, TV}

FUNC "L0")

Example of AUTO SOURCE CONTROL 1, 2 memory.

AUTO SOURCE

CONTROL

Surround mode

Volume

DOLBY PRO LOGIC

[pe

SURROUND

< ARBIZ80>