Pioneer XV-HTD510 Gebruiksaanwijzing - Pagina 44

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Pioneer XV-HTD510. Pioneer XV-HTD510 48 pagina's. Dvd receiver/speaker system
Ook voor Pioneer XV-HTD510: Gebruiksaanwijzing (48 pagina's)

Pagina afdrukken
Troubleshooting
Incorrect operation is often mistaken for trouble or malfunction. If you think that there is something wrong with this
component, check the points below:Sometimestile trouble may lie in another component. Inspect the other components
and electrical appliances being used. If the trouble cannot be rectified a:['ter c heckingthe items bdow,_k your neaest
Pioneer authorized servicecenter or your dealer tu caW out repair work.
i_l]l|l_,ll
_"_r,
I
iii
/
i///
The disc is ejected automati-
cally after loading.
•
Check that the disc is dean and undamaged (page 41,42).
•
Make sure that the disc is seated properly in the disc guide.
•
Check that the disc has a compatible region number (page 8).
•
There may be condensation inside the unit. Allow time for condensation to evaporate.
Avoid using the player near an air conditioning unit.
Playback
is not possible.
•
Check that the disc is loaded correctly (label side face up).
mark appears
on screen.
•
The operation is prohibited by the system.
1_ mark appears
on screen.
•
The setected function does not operate for that disc.
When making
changes in the
•
There is a CD or Video CD loaded and the seRing that was changed applies only to
Setup OSD menus, _
is
DVD discs. The settings will take effect next time a DVD is loaded.
displayed.
Picture playback
stops and
•
Switch the power off once, then on again usingthe front pand standby/on switch.
the operation
buttons cannot
be used.
New settings made in the
•
Some settings can be changed while a disc is playing, but are not effective until the
Setup screen menus while a
disc is stopped then restarted. This is not a malfunction. Note that making settings in the
disc is playing are ineffective.
Setup screen menus may cancelthe resumefunction.
Settings are canceled.
•
If the power was cut due to power failure or by unplugging the power cord, settings
will be canceled.
No picture/No
color.
•
Check that the video connections are correct and that plugs are inserted fully.
•
Check that the TV/monitor settings are correct.
Screen is stretched
or aspect
•
Make sure that the TV Screenoption in the Setup menu matches the TV/monitor
does not change,
you're using.
Picture
disturbance during
playback
or screen is dark.
•
This player is compatible with Macro-Vision System copy guard. Some discs include a
copy prevention signal, and when this type of disc is played back, stripes etc., may appear
on some sections of the picture depending on the TV.This is not a malfunction.
•
Problems with some discs may result in the screen becoming black for a brief instant
or shaking slightly when certain functions are executed.
•
Due to copy protection,
connection
of this system through a VCR or an AV selector
may prevent recording o_-cause picture problems. This is not a malfunction.