Ariston ALDS 80 Handleiding voor installatie en gebruik - Pagina 20

Blader online of download pdf Handleiding voor installatie en gebruik voor {categorie_naam} Ariston ALDS 80. Ariston ALDS 80 44 pagina's.

Pagina afdrukken

ARGHERITA

Here Im in command

Making the right choice is important. And its easy.

Programme selector knob

To select a programme, you

should turn the knob so that the

symbol/number of the desired

programme is in line with the

pointer on the glass G.

On-off

When button B is pressed, the

washing machine is switched on,

when it is not the machine is

switched off.

Turning the appliance off does

not cancel the selected

programme.

When the appliance is switched

on, all the symbols on the display

light up for at least 8 seconds,

after which only the ones that

can be selected will flash.

Start /Reset

This button allows you to start

the selected wash programme or

to interrupt it.

If you press it briefly, the button

functions as Start, if you press

it for at least 3 seconds, then it

functions as Reset.

After the Start of the appliance,

moving the programme selector

knob will have no effect

whatsoever.

Detergent dispenser

It is divided into three

compartments:

1. Detergent for pre-wash;

2. Detergent for the main cycle

wash;

3. Fabric conditioner.

The washing machine is

equipped with an extra

compartment 4 (provided as an

accessory) for the bleach, to be

inserted in compartment 1.

Programme key

This contains the descriptions of

the wash programmes and the

various functions connected to

the buttons. Pull it outwards to

open it.

The detergent dispenser with

the additional bleach

compartment is here.

Margherita - Instructions for installation and use

Margheritas knobs

are hidden. Just

press them lightly in

the middle to

extract them.

Mode

Select

Display

All the options available are

displayed on the right-hand side.

Use the Mode button to select

the desired option, and the rela-

tive symbol will begin flashing.

On the left-hand side, the value

or the status (On-Off) of the

selected option is displayed, and

you can modify it using the

Select button.

To access the subsequent option,

press the Mode button,

otherwise press button C (Start/

Reset) to start the wash cycle.

All the options available are

listed below.

Only options relevant to the

selected programme will be

displayed.

Temperature

The display indicates the

maximum temperature relating

to the programme set, which can

be reduced by pressing the

Select button right down to cold

wash (Off).

This option is available on all

wash programmes.

Understanding the control panel

Spin variation

The display indicates the maximum

speed relating to the programme

set, which can be reduced by

pressing the Select button right

down to its total exclusion (Off).

During a wash cycle, the selection

of the spin cycle exclusion is

indicated by symbol

coming

on.

This option is available on all

wash programmes except for

number 11 and Drain.

Wash intensity

This allows you to modify the

characteristics of the selected wash

programme, according to how

soiled the washing is. There are

three levels; press the select button

to Select them.

Low

Medium

High

This option is available on

programmes 1-2-3-5-6-7-8.

Delay timer

This allows you to delay the start

of the wash cycle by a minimum

of 1 to a maximum of 24 hours

by pressing the Select button.

The enabling of the delayed start

is indicated by the symbol

coming on and staying on until

the wash cycle begins.

This option is not available on the

Drain and Spin cycle

programmes.

Stain removal

(see page 21)

Thanks to this command, the

washing machine will carry out a

more intensive wash that optimises

the effectiveness of the liquid

additives, thus allowing more

resistant stains to be removed.

To use this, press the Select

button until the On sign comes on.

During a wash cycle, the

selectionof this option is indicated

by symbol

coming on.

This option is available on

programmes 2-3-5-6-7-8-10 and

Rinse cycles.

Note: It must not be used with the

Easy iron option.

Easy iron

This function allows your

washing to come out of the

machine without creases,

making it much easier to iron.

The appliance optimises the

washing conditions according to

the type of fabrics that are being

washed.

It is enabled with programmes

3-5-6-7-8-11 and Rinse cycles.

To enable it, press the Select

button until the On sign comes on.

In programmes 6-7-8-11 and

Light Rinse cycles, the wash

cycle is interrupted and the

washing is left to soak in water

before the appliance is drained.

To complete the cycle, press the

Select button.

During a wash cycle, the enabling

of this option is indicated by

symbol

coming on.

Note: It must not be used with

the Stain removal option.

Rinse level

This increases the efficiency of

the rinse. We recommend that you

use it when dealing with a full

load and a great amount of

detergent.

There are three levels; press the

Select button to select them.

Low

Medium

High

This option is available on

programmes 1-2-3-4-5-6-7-8 and

Rinse cycles.

Note: Function

is disabled.