Pioneer VSX-5300 Gebruiksaanwijzing - Pagina 2
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Pioneer VSX-5300. Pioneer VSX-5300 37 pagina's. Audio/video stereo receiver
Ook voor Pioneer VSX-5300: Servicehandleiding (44 pagina's)
IMPORTANT
The lightning flash with arrowhead,
within
an equi-
Jateral
triangle,
is intended
to alert the user
of the
presence
of uninsulated
'dangerous
voltage'
within
the
praduct's
enclosure
that
may
be
of sufficient
magnitude
to constitute
a risk of electric
shock
to
persons.
CAUTION
RISK OF ELECTRIC SHOCK
[olom (ok me) 13.)
'
CAUTION:
TO PREVENT THE RISK OF ELECTRIC SHOCK,
DO
NOT
REMOVE
COVER
(OR
BACK).
NO
USER-SERVICEABLE
PARTS
INSIDE.
REFER
SERVICING
TO
QUALIFIED
SERVICE
PERSONNEL.
The exclamation point within an equilateral triangle is
intended to alert the user of the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying
the appliance.
SAFETY INSTRUCTIONS
READ
INSTRUCTIONS — Ali
the
safety
and
operating
instructions shouid
be read before the
appliance is operated.
RETAIN
INSTRUCTIONS
— The operating instruc-
tions should
be retained for future reference.
HEED
WARNING
—
All warnings on the appliance
and
in
the
operating
instructions
should
be
adhered to.
FOLLOW
INSTRUCTIONS
—
All operating and use
instructions should be followed.
WATER
AND
MOISTURE
— The appliance should
not be used
near water
—
for example,
near a
bathtub, washbow/i, kitchen sink, laundry tub, ina
wet basement, or near a swimming pool, etc
LOCATION
— The appliance should be installed in a
stable location.
WALL
OR
CEILING
MOUNTING
— The appliance
should not be mounted
to a wall or ceiling.
POWER
LINES — An
outdoor
antenna
should
be
located away from power lines.
NONUSE
PERIODS
—The
power
cord
of
the
appliance
should
be unplugged
from the outlet
when
left unused for a long period of time.
OBJECT
AND
LIQUID
ENTRY
— Care
should
be
taken so that objects do not fall and liquids are
not spilled into the enclosure through openings.
DAMAGE
REQUIRING SERVICE — The appliance
should
be serviced by a Pioneer authorized
ser-
vice center or qualified service personnel when
@
The
power-supply
cord
or
the
plug
has
been
damaged;
or
@
Objects have fallen, or liquid has been spilled into
the appliance; or
@
The appliance has been exposed to rain; or
@
The appliance
does not appear
to operate
nor-
mally
or
exhibits
a marked
change
in perfor-
VENTILATION — The appliance should be situated
mance; or
so that its location or position does not interfere
@
~The appliance has been dropped; or the enclosure
with its proper ventilation.
For example,
the ap-
damaged
pliance should not be situated on a bed, sofa, rug,
or similar surface
that may
block the ventilation
openings: or, placed in a built-in installation, such
as a bookcase
or cabinet
that may
impede
the
flow of air through the ventilation openings
HEAT
-- The appliance should be situated away from
heat sources
such as radiators,
heat registers,
stoves, or other appliances (including amplifiers)
that produce heat
POWER
SOURCES
— The
appliance
should
be
connected
to a power
supply
only of the type
described
in
the
operating
instructions
or
as
marked on the appliance.
POWER-CORD
PROTECTION
~— Power-supply
cords should be routed so that they are not likely
to be walked on or pinched by items placed upon
or against
them,
paying
particular
attention
to
cords at plugs, convenience
receptacles, and the
point where they exit from the appliance
POLARIZATION
- - If your
purchased
product
is
provided with a polarized power pluy, please read
the
following
instructions.
This
product
is
equipped with a polarized alternating current line
plug
(a plug
having
one
blade
wider
than
the
other). This phag will fit into the power outlet only
SERVICING
— The
user
should
not
attempt
to
service the appliance beyond that described in the
Operating
instructions.
For all other servicing,
contact
the
nearest
Pioneer
authorized
service
center
POWER
LINES
SERVICE
o
ENTRANCE
CONDUCTORS,
ee
GROUND
GROUND
WIRE
ab
OUTDOOR ANTENNA GROUNDING — If an out-
side antenna
is connected
to the antenna
termi-
nal, be sure the antenna system is grounded so as
to provide some protection against voltage surges
and built up static charges
In the U.S.A. section
810 of the National
Elec-
trical Code, ANSI/NFPA
No.
70-1984,
pravides
information
with respect to proper grounding of
the mast and supporting
structure, grounding
of
the lead-in wire to an antenna discharge unit, size
of grounding
conductors,
location
of antenna-
discharge
unit,
connection
to grounding
elec-
trodes, and requirements for the grounding elec-
trode.
See Fig. A
a)
Use No. 10 AWG (5.3 mm?) cop-
per, No. 8 AWG
(84 mm?) alu-
minum, No. 17 AWG (1.0 mm?)
copperclad
steel, bronze wire,
or
larger as ground wire
b)
Secure
antenna
lead-in
and
ground
wires
to
house
with
stand-off
insulators
spaced
from
4 feet
(1.22
meters)
to
6 feet
(1.83 meters) apart
c)
Mount
antenna discharge unit as
closely as possible to where lead-
in enters house
STAND. OFF
d)
Use jumper wire not smaller than
INSUEATORS 2
No6
AWG
(13.3 mm?)
copper,
or the equivalent,
when
a sepa-
rate antenna- grounding
electrode
is used.
See NEC Section 810-21
(j)
ANTENNA
LEAD IN WIRE
TO EXTERNAL ANTENNA
TERMINALS OF PRODUCT
ANTENNA
Wea
awe
"yo
ou
pue
one way
This tsa safety feature. If you are unable
SERVICE ENTRANCE
DISCHARGE
UNIT &
CLEANING
The appliance should be cleaned only
GROUNDING
ELECTRODE
SYSTEM
with a polishing cloth or a soft dry cloth.
Never
(eg intenor metal water ppe)
Clean
with
furniture
wax,
benzine,
insecticides
or
BONDING
Hy
ORIVEN
8 FEET (2 44 m)
3
3
enit
e s
's
"
r
:
+
INTO
THE
EARTH
other volatile tquids since they may corrode the
JUMPER &
re
ie REQUIRED BY
cabinet
FIG.A
u
LOCAL CONES SEE
U
NEC SECTION 810 21 (1)
(7 OPTIONAL ANTENNA
GROUNDING ELECTRODE
2
~CARB1113 >