Pioneer VSX-605S Gebruiksaanwijzing - Pagina 12
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Pioneer VSX-605S. Pioneer VSX-605S 37 pagina's. Audio/video stereo receiver
Ook voor Pioneer VSX-605S: Gebruiksaanwijzing (37 pagina's)
Pagina afdrukken
| REAR PANEL FACILITIES
Ilustration shows Multi-voltage model,
{aurpwewan
yee ax severecs) |
A AN
GAO OLB 7
1: FM/AM ANTENNA terminals
() CONTROL IN/OUT jacks
Use these antenna terminalis for reception of normal FM and
iN
:Connects this jack to the control out jack of an unit
AM broadcasts.
attached §@! mark using a commercially available cord
with mini-plugs {without load). The remote control
(2) SAT(Satellite})/TV jacks (input)
signal sensor of this unit will not receive the remote
Use these jacks if you wish to connect a TV (Digital satellite
control signal while connecting, The unit attached ff
system) tuner with both video and audio optputs.
mark can be operated using a remote control through
the connected cord from the remote contro! sensor
"
A
f another unit attached Gi mark.
\
0
(3) VIDEO OUT (TO MONITOR
TV) jack
OUT
:Connects this jack to the control input jack of an unit
Connect to a monitor TV or to TV sets with video input terminals
to watch program materials from a VCR or LD player connected
to this unit.
attached ff] mark using a cornmercially available cord
with mini-ptugs (without load).
Outputs the remote control signal to another unit
from this unit or the relay signal from the control input
SYSTEM CONTROL IR OUT jacks
jack.
To operate other components with this unit's remote control or
with GUI, connect the supplied repeater (See page 11).
MINI-REPEATER 1,2:
connect the supplied MINI-REPEATER.
MAIN-REPEATER:
:
as
connect the supplied MAIN-REPEATER.
Receiver
(
E>
/{\
PIONEER component
Renate
()
bearing the &@ mark.
Sonecolunt
To the CONTROL IN jack of the PIONEER
component bearing the Gl mark.
NOTE:
© If there is a piug in this unit's CONTROL IN jack, ISC and GUI
operations using the remote control unit are not possible,
® The remote control unit provided with this unit adopts a
different method from the remote control units of Pioneer
systems, Consequently, this unit and other components
will
not operate when the remote control unit is directed at the
remote contral signal sensor window of the connected
components.
Other components will not operate unless a signal is received
by the sensor window of this unit, and this unit consequently
converts the signal received to the remote control signal
corresponding to the other component,
12
<ARB7059>