Pioneer DC-Z92 Gebruiksaanwijzing - Pagina 6

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Pioneer DC-Z92. Pioneer DC-Z92 28 pagina's. Stereo double cassette tape deck amplifier

Pagina afdrukken

CONNECTIONS

Refer to page 2 for the connections diagram.

ceessory FM antenna

sory AM loop antenna

3 . FMAM

tuner (F292 or F-292L)

Turntable (Separately sold PL-Z82 or PL-Z92)

Tuner

inputioutput cord

Surround speaker system

(: CD player control cord

(@. Cassette tape deck amplifier

Turntable

output cord

Speakers cord

(

Speaker system

42 Power cord

w h

€D player (Separately sold PD-Z?2T or PD-Z82M)

Plug the power card into the AC wall socket ou

connections have been cornpleted

eervraeD

[ Hf the FM antenna terminal of the FM/AM tuner is a PAL connector

L only, then

refer to connection diagram B

Proceed as follows with the set-up and connections.

1, Place the cassette tape deck amplifier on top of the CD player.

2. Connect the CD player OUTPUT jacks to the cassette tape deck

amplifier CD INPUT jacks with audio cords.

3. Place the tuner on top of the cassette tape deck amplifier.

4, Connect the tuner input/output cord

'5) to cassette tape deck

amplifier.

TUNER CONNECTION (Page 3, diagram C}

Insert the connector until it locks, thus ensuring that it is connected.

When disconnecting the connector, puil it in the opposite direction

while pressing the left and right claws

If using this unit together with the optional PD-272T or PD-282M.

connect the control cord <7).

5. Connect the FM antenna '1! and the AM foop antenna '2: to the

tuner's antenna terminais.

6, Place the turntable on top of the tuner

7. Connect

the turntable's

cords (9: to the cassette

tape deck

amplifier's jacks.

lf using this unit together with the optional PL-282 or PL-292,

connect

the

turntable's

audio

cords

and

power

supply

cord

respectively to the cassette tape deck amplifier's PHONO jacks and

DC 12V OUTPUT jack.

H using a different turntable, connect the audio cord and earth cord.

8. Use

the

"DAT/VIDEO"

jacks

for

connection

to the

audio

input/output jacks of a DAT or VCR.

lf connecting an LD player, connect the LD player's audio output

jacks to the "DAT/VIDEO"' input jacks.

NOTE:

* Insert the plugs securely into the jacks. improper connection can lead

to sound distortion or malfunetioning.

* The white plug is for the left channel connection and the red plug

for the right channef connection

9. Connect the speaker cords 75 to the SPEAKERS terminals.

Connect the " +'' terminals on the cassette tape deck amplifier to

the "+

terminals on the speakers, the ''-'

terminals on the

cassette tape deck amplifier to the '' — '' terminals on the speakers.

Connecting the speaker cords.

1 cue

Speaker cord

Saou]

P oie

Twist the strands.

Omm

Push away.

Pull back.

NOTE:

Do not allow the conductors of the cords to project beyond the terminals

and to come into contact with other conductors.

A breakdown or failure

may occur when conductors touch one another.

Speaker impedance

Connect speaker systems with a nominal impedance of between 6 and

162

Surround speaker connection

Connect the plugs properly.

Connect a speaker system having

22°

a nominal impedance of 16 2 or

10. Finally. connect the power cord '\)) to the AC wail socket (15).