Pioneer GM-A5702 Gebruikershandleiding - Pagina 10

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Pioneer GM-A5702. Pioneer GM-A5702 16 pagina's. Bridgeable two-channel
Ook voor Pioneer GM-A5702: Gebruikershandleiding (19 pagina's), Gebruikershandleiding (33 pagina's), Gebruikershandleiding (33 pagina's)

Pioneer GM-A5702 Gebruikershandleiding
Connecting the units

About bridged mode

! Do not install or use this amplifier by wiring
speakers rated at 4 W (or lower) in parallel to
achieve a 2 W (or lower) bridged mode (Dia-
gram B).
Amplifier damage, smoke, and overheating
could result from improper bridging. The am-
plifier surface could also become hot to the
touch and minor burns could result.
To properly install or use a bridged mode and
achieve a 4 W load, wire two 8 W speakers in
parallel with Left + and Right * (Diagram A)
or use a single 4 W speaker.
In addition, refer to the speaker instruction
manual for information on the correct connec-
tion procedure.
! For any further enquiries, contact your local
authorized Pioneer dealer or customer
service.
About suitable
specification of speaker
Ensure speakers conform to the following
standards, otherwise there is a risk of fire,
smoke or damage. Speaker impedance is 2 W
to 8 W for stereo connection, or 4 W to 8 W for
monaural and other bridge connection.
Subwoofer
Speaker channel
Two-channel output
One-channel output
Other than subwoofer
Speaker channel
Two-channel output
One-channel output
En
Autogoods "130"
Power
Nominal input:
Min. 150 W (GM-A5702)
Min. 60 W (GM-A3702)
Nominal input:
Min. 480 W (GM-A5702)
Min. 190 W (GM-A3702)
Power
MAX input:
Min. 300 W (GM-A5702)
Min. 170 W (GM-A3702)
MAX input:
Min. 1000 W (GM-A5702)
Min. 500 W (GM-A3702)