Pioneer PL-Z92 Gebruiksaanwijzing - Pagina 6
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Pioneer PL-Z92. Pioneer PL-Z92 28 pagina's. Stereo double cassette tape deck amplifier
Ook voor Pioneer PL-Z92: Gebruiksaanwijzing (29 pagina's)
Pagina afdrukken
CONNECTIONS
Refer to page 2 for the connections diagram.
i
ceessory FM antenna
sory AM loop antenna
3 . FMAM
tuner (F292 or F-292L)
Turntable (Separately sold PL-Z82 or PL-Z92)
Tuner
inputioutput cord
Surround speaker system
(: CD player control cord
(@. Cassette tape deck amplifier
Turntable
output cord
Speakers cord
(
re
¢
Speaker system
42 Power cord
w h
€D player (Separately sold PD-Z?2T or PD-Z82M)
Plug the power card into the AC wall socket ou
connections have been cornpleted
eervraeD
|
[ Hf the FM antenna terminal of the FM/AM tuner is a PAL connector
|
L only, then
refer to connection diagram B
Proceed as follows with the set-up and connections.
1, Place the cassette tape deck amplifier on top of the CD player.
2. Connect the CD player OUTPUT jacks to the cassette tape deck
amplifier CD INPUT jacks with audio cords.
3. Place the tuner on top of the cassette tape deck amplifier.
4, Connect the tuner input/output cord
'5) to cassette tape deck
amplifier.
TUNER CONNECTION (Page 3, diagram C}
Insert the connector until it locks, thus ensuring that it is connected.
When disconnecting the connector, puil it in the opposite direction
while pressing the left and right claws
If using this unit together with the optional PD-272T or PD-282M.
connect the control cord <7).
5. Connect the FM antenna '1! and the AM foop antenna '2: to the
tuner's antenna terminais.
6, Place the turntable on top of the tuner
7. Connect
the turntable's
cords (9: to the cassette
tape deck
amplifier's jacks.
lf using this unit together with the optional PL-282 or PL-292,
connect
the
turntable's
audio
cords
and
power
supply
cord
respectively to the cassette tape deck amplifier's PHONO jacks and
DC 12V OUTPUT jack.
H using a different turntable, connect the audio cord and earth cord.
8. Use
the
"DAT/VIDEO"
jacks
for
connection
to the
audio
input/output jacks of a DAT or VCR.
lf connecting an LD player, connect the LD player's audio output
jacks to the "DAT/VIDEO"' input jacks.
NOTE:
* Insert the plugs securely into the jacks. improper connection can lead
to sound distortion or malfunetioning.
* The white plug is for the left channel connection and the red plug
for the right channef connection
9. Connect the speaker cords 75 to the SPEAKERS terminals.
Connect the " +'' terminals on the cassette tape deck amplifier to
the "+
terminals on the speakers, the ''-'
terminals on the
cassette tape deck amplifier to the '' — '' terminals on the speakers.
6
<ARB1156>
Connecting the speaker cords.
1 cue
2
Speaker cord
Saou]
s
P oie
Twist the strands.
Omm
3
Push away.
4
Pull back.
NOTE:
Do not allow the conductors of the cords to project beyond the terminals
and to come into contact with other conductors.
A breakdown or failure
may occur when conductors touch one another.
Speaker impedance
Connect speaker systems with a nominal impedance of between 6 and
162
Surround speaker connection
Connect the plugs properly.
Connect a speaker system having
22°
a nominal impedance of 16 2 or
more
10. Finally. connect the power cord '\)) to the AC wail socket (15).