Pioneer SA-1490 SD Gebruiksaanwijzing - Pagina 8

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Pioneer SA-1490 SD. Pioneer SA-1490 SD 20 pagina's.

Pagina afdrukken

NAMES AND USES OF PARTS

Use to temporarily cut out all audio signals.

When the function is ON, sounds will be cut off. (POW-

ER indicator will flash)

When turned OFF, the sound returns to its previous le-

vel. The muting ON/OFF function can also be operated

by the accessory remote control unit.

@ VOLUME control/indicator

Use to adjust sound volume.

When operated by remote control, this control will rot-

ate with the knob indicator flashing.

Adjustment can also be performed with the accessory

remote contro! unit.

@ GRAPHIC EQUALIZER controls/indicators

These controls can be used to emphasize or de-empha-

size sounds in the frequency bands 60Hz, 150Hz, 400Hz,

TkHz, 2.4kHz, 6kHz, 15kHz, thus allowing you to control

tone quality. The center position of each control is the

normal (flat) setting. When raised above the center posi-

tion, the control frequency band is emphasized; when

lowered, the band is de-emphasized.

@ EQUALIZER ON/OFF switch

When this switch is pressed, the GRAPHIC EQUALIZER

control's indicators turn on, and its functions become

Operative.

When pressed once again, the indicators go out and its

are turned OFF. Use this switch in the following manner:

[ON]

: When

using the equalizer

to add sound com-

pensation

while

performing

program

sources,

and

playing

back

and/or

recording

results.

[OFF]: When

not

using

the

equalizer,

but

playing

back

recording

program

sources

without

compensation.

@ SPECTRUM ANALYZER

This display shows the condition of sound signals compen-

sated with the graphic equalizer controls.

(Because the level indicator is connected to the input side,

the indication does not change when the VOLUME control

is turned.)

@ FUNCTION indicators

These indicators light to show the setting of the FUNC-

TION switches.

@® STANDBY/SLEEP indicator

This indicator flashes when

the accessory

remote

contro! unit is used to turn the SLEEP key. When the

SLEEP key is ON, the indicator will flash. (Initially it

will flash slowly, then gradually become faster.)

Sixty minutes after the sleep timer is turned ON, the

power switch will be turned to STANDBY automati-

Cally.

This indicator lights when the accessory remote con-

trol unit or this unit is used to turn the POWER key.

This component features a built-in microcomputer which

will recall the last-set positions of the following switches

for up to about several days after the power cord is dis-

connected. As a result, when the power is turned ON

again, the previously set positions will be recalled auto-

matically:

e FUNCTION switch

® MUTING switch

@ EQUALIZER ON/OFF switch

When the unit is not used for more than several days,

the memorized setting positions will be erased, and re-

turned to the following settings: