Pioneer VSP-200 Gebruiksaanwijzing - Pagina 3

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Pioneer VSP-200. Pioneer VSP-200 15 pagina's. Av surround processor/amplifier

Pagina afdrukken

| PUTTING BATTERIES INTO THE REMOTE |

CONTROL UNIT

1. Open the battery compartment cover on the rear of the

remote contro! unit.the cover should open easily if you

side it in the direction of the arrow while pressing on it

with your thumb

2. Take out the two supplied batteries size- AA*(REP),and

insert then into thebattery compartment in accordance

with the indications in the compartment.

3. Close the cover of the battery compartment.

Incorrect use of batteries may lead to leakage or

rupture.Al ways be sure to follow these guidelines:

Always insert ba tteries into the battery compartment cor-

rectly matching the positive (+Jand negativel-)polalities,as

indicated inside the compartment

Never mix new and used batteries

Cc.

Batteries of the same size may have different voltages,

depending on their type.Do not mix different types of batter-

ies.

SURROUND EFFECT

This unit has a built-in surround processor for adding

presence and an expansive effect to the sound

+ STUDIO:

Select this position to enjoy the effect of listening to music

in @ recording studio. The source sound is output as it is

through

the front speakers,with

reverberation

output

through the rear speakers This is particularly suitable for a

source that has a lot of reverbelation

+ SIMULATED SURROUND:

The "SIMULATED

SURROUND"

creates effects of rever-

berated and reflected sound from the walls and ceiling simi-

jar to a concert hall. These sound-effects added to the actual

sound from the source make you feel as if you were ina

more expanded space.The different anges of the expanded

space can be set by the DELAY TIME button on the remote

control unit

Set the delay time tol5ms

or 20ms

for a live-house

concert.For

chamber

music,set

to 20ms.For

orchestral

music,set to 30ms. The

"SIMULATED

SURROUND'also

gives effects on monaural sources by outputting the rever-

berated sound from rear speakers while keeping the output

sound frorn front speakers as it is. Turn on the "SIMULATED

SURROUND*

for a monaural

source to gain effective sur-

round playback

+ DOLBY*PRO LOGIC SURROUND:

Choose this setting for movies and music(especially Video Dises

and video tapes bearing the DO [baev sunrouns) mark)playback.

DOLBY PRO LOGIC SURROUND continuously detects the size and

direction

of the dominant

signal and cancels

undesirable

crosstalk, thereby providing signal emphasis.

It makes you clearly perceive the directions where the music comes

from.real flow of sound can also be re-created naturally using this

feature.You can feel as if being in an outstanding and expansive

sound field.

When using DOLBY PRO LOGIC SURROUND ,a delay time setting

of 20ms is commonly used.Use a different setting if you prefer.

Even if they do not bear the D[povey sunnouno] mark,some video

recordings may be Dolby Surround encoded

Choose the SIMULATED SURROUND

mode if the source sound

signal is mono.Little or no sound will be heard from the surround

speakers if the STUDIO or DOLBY PRO LOGIC SURROUND mode

is selected.

With DOLBY PRO LOGIC

SURROUND, monaural source sound will

be heard only from the center channel at settings other than the

PHANTOM

position.

Note:

Dalby Surround will not operate correctly if the signal

passes through a graphic equalizer

When using Dolby Surround,set the graphic equalizer for

flat response or to its "through'(or off )setting,if you have

one in use.

Manufactured

under license

from Dolby Laboratories

Licensing

Corporation.

DOLBY and the double-D

symbai DO are

trademarks

of Dolby

Laboratories Licensing Corporation.