Pioneer VSX-305 Gebruiksaanwijzing - Pagina 15

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Pioneer VSX-305. Pioneer VSX-305 29 pagina's. Audio/video stereo receiver
Ook voor Pioneer VSX-305: Gebruiksaanwijzing (28 pagina's), Servicehandleiding (37 pagina's)

Pagina afdrukken

FRONT PANEL FACILITIES

® S.BASS indicator

(®) SFC indicator (Not available on the VSX-295

model)

This lights when an SFC mode (STUDIO or SIMULATED

SURROUND)

is selected.

<C) DOLBY PRO LOGIC indicator (Not available on

the VSX-295 model)

(D) TAPE 2 indicator

Lights up when

the input selector

is set to TAPE

MONITOR ON.

Indicates the class selected by the CLASS

button. The

current CLASS is displayed.

') MEMORY

indicator

'G) STEREO/MONO

indicator

STEREO

: Lights up when a stereo FM broadcast is

being received.

MONO

: Lights up when the FM MONO

mode is select

ed with the MPX MODE

button.

(W TUNED indcator

Lights up when a staton is tuned.

() Character display

OPERATING THE TUNER

Press the POWER switch to the ON position.

Select TUNER with the input selector.

Be sure to turn the TAPE 2 MONITOR

button OFF when

listening to AM or FM broadcasts.

Switch ON the SPEAKERS

button corresponding to the

speakers you wish to use.

FM auto stereo reception and monaural reception

Each time you press the MPX MODE button, the MONO

indicator in the display section lights or goes out.

e If an FM stereo broadcast is received when the MONO

indicator is out, the STEREO indicator lights and sound

is in stereo.

e lf an FM stereo broadcast is received when the MONO

indicator is lit, the sound will be monaural.

If there is interference during STEREO

mode recep-

tion, switch to MONO. The sound will become monau-

ral but interference will be reduced.

TUNING INTO STATIONS

Press the TUNING

buttons, and the tuning frequency

changes.

+: Performs tuning from

the currently displayed station

frequency in ascending frequency order.

~: Performs tuning in order of descending frequencies.

1. Use the FM/AM button to select either FM or AM.

2. Press the TUNING

(+,-) buttons

until you reach the

frequency of a desired station.

When a station is received, the TUNED indicator will

light up.

NOTE:

The TUNED indicator may not light with broadcasts received over

long distances, or when the broadcast signals are extremely weak.

3. Adjust the volume and tone controls as desired.

AUTO TUNING (FM only)

Auto tuning is convenient when you do not remember the

frequency of a desired station, or when you wish to find

stations that you do not normally listen to. (Refer to

page 14.)