Pioneer CDJ-850 Gebruiksaanwijzing - Pagina 17

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Pioneer CDJ-850. Pioneer CDJ-850 32 pagina's. Cdj-850 owner's manual (french)
Ook voor Pioneer CDJ-850: Snelstarthandleiding (3 pagina's), (Engels) Gebruikershandleiding (32 pagina's)

Pagina afdrukken

Operations

Setting the source to be played

e f

i j

BROWSE

USB

STOP

DISC

1 / 16

TIME

AUTO

MODE

CUE

1 / 8

Loading discs

! Set the disc with the printed side facing up.

! Insert the disc horizontally into the disc insertion slot in the main

unit's front panel.

! Do not load more than 1 disc.

! Do not force discs into the set's disc insertion slot when the set's

power is off. Doing so could damage the disc or the set.

! When the disc is being drawn in or ejected, do not apply any force

to the disc in the direction opposite its movement. Doing so could

damage the disc or the set.

Press [u] C.

Turn on the power of this unit.

Load the disc in the disc insertion slot I.

Playback starts.

! When auto cue is turned on, playback starts when

[PLAY/PAUSEf] is pressed. For details on the auto cue function,

see Setting auto cue on page 21.

Ejecting discs

Press [h DISC EJECT] r.

The disc is ejected from the disc insertion slot.

! If [DISC EJECT h] is pressed accidentally, press [PLAY/PAUSEf]

immediately to return to the status directly before [DISC EJECT h]

was pressed. (No sound is output during this time.)

About ejecting discs by force

! If the disc is not ejected when [DISC EJECT h] is pressed, the disc

can be ejected forcibly by inserting the disc force eject pin into the

disc force eject pin insertion hole on the main unit's front panel.

! When forcibly ejecting a disc, be sure to do so following the proce-

dure below.

UTILITY

TAG TRACK

BACK

TAG LIST

INFO

/REMOVE

STANDBY

DISC EJECT

VINYL

SPEED ADJUST

Press [u] C to turn this unit's power off, then wait at

least 1 minute.

Never forcibly eject a disc directly after turning off the set's power.

Doing so is dangerous for the reasons described below.

The disc will still be spinning when ejected and could hit your

fingers, etc., causing injury.

Also, the disc clamp will rotate in an unstable way, and the disc

could get scratched.

Use the included disc force eject pin. (Do not use

anything else.)

The included disc force eject pin is mounted on the CDJ-850's bottom

panel. When the pin is inserted all the way into the insertion hole, the

disc is ejected 5 mm to 10 mm out of the disc insertion slot. Grasp the

disc with your fingers and pull it out.

Loading USB devices

Connect the USB device to the USB device insertion slot d.

The USB indicator lights.

Removing USB devices from the set

! Be sure to follow the procedure below when removing USB

devices from the set. Removing a USB device without following

this procedure could erase the set's management data and make it

impossible to read the USB device.

! When turning the set's power off, be sure to remove the USB device

first.

Press [USB STOP] b for at least 2 seconds.

The USB indicator turns off.

Disconnect the USB device.

Using the [BROWSE] button

When [BROWSE] is pressed, the contents of the medium loaded in this

unit are displayed on the information display section.

Browsing libraries and folders

This displays the loaded tracks, sorted in category or tree structure.

The display on the information display section differs according to

whether or not library information is recorded on the USB device.

— With library information d Library browsing: The music files are

displayed by the categories set in rekordbox (album, artist, etc.).

The category types can be changed in the Preferences (environ-

mental settings) in rekordbox.

— Without library information d Folder browsing: The folders/ tracks

on the medium are displayed with a tree structure.

Contents recorded on discs cannot be viewed in the library browse

mode.

Title 01

Title 02

Title 03