Pioneer CDX-P670X1N Servicehandleiding - Pagina 36
Blader online of download pdf Servicehandleiding voor {categorie_naam} Pioneer CDX-P670X1N. Pioneer CDX-P670X1N 50 pagina's. Multi-compact disc player
Ook voor Pioneer CDX-P670X1N: Servicehandleiding (50 pagina's)
Pagina afdrukken
CDX-P670
12. To see the amount of dislocation, place the mechanism upside-down.
If the stopper bend has been dislocated in the direction of the first
CD, turn VR802 to the left(Fig. 2).
To lower the stage toward the sixth step by 0.1 mm, reduce the volt-
age of EREF (adjusted in step 8) by 20 mV.
If the stopper bend has been dislocated in the direction of the sixth
CD, turn VR802 to the right(Fig. 4).
To raise the stage toward the first step by 0.1 mm, increase the volt-
age of EREF (adjusted in step 8) by 20 mV.
13. Place the mechanism horizontal. Go back to step 11 to reconfirm the
stage height.
14. When adjustment of the stage height is completed, proceed as fol-
lows:
15. Press the EJECT switch.
16. Once operation of the mechanism has stopped, turn the power OFF.
17. Wait more than one minute after the power is turned off, then turn the power ON and insert a magazine.
18. Check if the mechanism operates correctly with the first and fourth CDs.
19. If the mechanism operates properly, adjustment is completed. If the mechanism operates improperly, make the
adjustment again.
36
VR802
GND
EREF
47kΩ
L.P.F.
1µF
Oscilloscope