Ariston AWD 120 Reparatiehandleiding - Pagina 8

Blader online of download pdf Reparatiehandleiding voor {categorie_naam} Ariston AWD 120. Ariston AWD 120 20 pagina's. Washer / washer-dryer combo

4. CONTROL PANEL COMPONENTS - Program Selector

• To remove the Program Selector, first remove the Program Selector Knob by grasping it firmly and pulling it toward you (Fig. 4-6).

With the Knob removed loosen the Phillips Screw and remove the Program Knob Bezel (Fig. 4-7). Now rotate the Program Dial

until the half moon cut out lines up with the Program Selector Locking Tab (Fig 4-8).

• Using a small screwdriver push in on the Locking Tab (Fig. 4-9), while holding the Locking Tab in use your other hand to bring the

bottom of the Program Selector slightly away from the Mounting Plate, and then remove by sliding it up and off (Fig 4-10). In Fig.

4-11 you can see the four (4) alignment tabs that hold the Program Selector to the Program Selector Mounting Plate.

TECH NOTE: The Program Selector Mounting Plate does not have to be removed in order to remove the Program Selector.

TECH TIP: The Program Knob Bezel, Program Dial and Program Knob are all keyed to make re-installation easier.

REPAIR MANUAL

Fig. 4-6

Fig. 4-9

Fig. 4-7

Fig. 4-10

AW 120 / AW 122 / AW 125

AWD 120 / AWD 121 / AWD 129

Fig. 4-8

Fig. 4-11

Page: 5