Pioneer LaserDisc CLD-D604 Gebruiksaanwijzing - Pagina 16
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Pioneer LaserDisc CLD-D604. Pioneer LaserDisc CLD-D604 30 pagina's. Cd cdv ld player
Pagina afdrukken
APPLIED
OPERATIONS
................
rqrara¢4
_ED raOOra
I
o play an LD from the position where
playback was last stopped
If • or POWER is pressed during playback,
and playback
has not
reached the middle
of the disc, it is possible to restart playback
from the position where it was stopped.
When playback of an LD is stopped by pressing • or POWER, the
address where the playback is stopped is stored in memory
and,
provided
that the disc is left in the LD disc table, the stored
ad-
dress is held in memory
even after the power
is switched
off.
When you switch
the power on and press LAST MEMORY,
play-
back starts from the position where it was last stopped,
LAST
_
LAST
MEMORY
MEMORY
To start playback
directly
from the position
where
it was
stopped:
Position slightly before
Position where playback
was stopped
Press LAST MEMORY
once, Playback
starts from the position
slightly before the position where it was last stopped.
To start playback after reviewing
the plot from the beginning
to the position where it was last stopped:
[f - -%
Press LAST MEMORY
consecutively
twice. A short period of play-
back and fast forward operations
are repeated from the beginning
of the disc until slightly
before the position where
playback was
last stopped,
and normal playback
starts from there. By pressing
LAST MEMORY
again during the fast forward
operation, playback
can be started directly from slightly
before the position where it
was last stopped.
16
<VRB1148>
NOTES
:
•
The last memory
playback
function
is available
only with
LDs. It is not available with CD and CDV discs.
•
If playback
was last stopped
in the middle
of side B of a
double-sided disc, the last-memory
playback starts from side
B.
•
When m, is pressed
to start playback
after it has been
stopped with •, playback starts from the beginning
of the
disc.
•
Be sure to leave the disc inside the player. The last-memo-
ry playback
is not possible
once the disc has been taken
out of the player.
•
Be sure to plug the AC power cord into a power
outlet to
which power is supplied permanently,
Audio switching
Every time AUDIO
D/A is pressed during
playback,
the played
audio is switched.
This makes it possible to;
•
listen to the analog audio of a disc with digital audio;
•
listen to only one of the two channels of a stereo disc;
•
select the audio to be played from multiplexed
audio disc.
LD with digital audio
It is possible to switch
between
the digital and analog audio and
between the L (Left) and R (Right) channels of stereo audio.
AUDIO
D/A
2---/
Digital audio
_ Analog audio__
Analog
audio
r
stereo)
_
(stereo)
L CH
q
L
Digital audio
_
Digital audio
<_
Analog audio_.J
R CH
4,-
L CH
R CH
•
In a case of a disc recorded
with Dolby AC-3 signal, only
the left channel signal is heard in monaural mode when an
analog audio is selected.
LD with analog audio
•
Disc containing CX auto ON (OFF) switching codes
AUDIO
D/A
FStere°audi°
_
LCH
_
RCH
-_
•
Disc without CX auto ON (OFF) switching codes
CX OFF
CX ON
CX ON
AUDIO I-_
(stereo) _
(stereo) _"
(L OH) -'---I
D/A
L
_J
_
CX OFF
CX OFF
CX ON
(R OH)
(L OH)
(R CH)
and
AUDIO
_
_
r
stereO
audiO
-
L cH
--_,-
R CH
q
LD with
E_I_ mark
D_4 functions on the analog audio of LD.
With an LD carrying the D_ mark, audio can be played with
re-
duced noise using the CX noise reduction system.
Some of the discs carrying the []p'I',4 m ark do not contain the codes
for automatic
ON/OFF
switching
of the CX system.
With such
discs, turn CX ON by pressing AUDIO D/A on the remote control
unit.
• E>_ is a trademark
of CBS, This player conforms to the extended
specifications
of CX,