Pioneer DV-393-S Gebruiksaanwijzing - Pagina 13

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Pioneer DV-393-S. Pioneer DV-393-S 48 pagina's. Pioneer operating instruction dvd player dv-393-s dv-490v-s
Ook voor Pioneer DV-393-S: Gebruiksaanwijzing (48 pagina's), Gebruiksaanwijzing (48 pagina's), Gebruiksaanwijzing (48 pagina's)

Pagina afdrukken

Connecting up

Watching progressive scan video

from the component video outputs

This player can output progressive scan video

from the component video output. Compared

to interlace video, progressive scan video

effectively doubles the scanning rate of the

picture, resulting in a very stable, flicker-free

image.

To set up the player for use with a progressive

scan TV, see Video Output settings on page 35.

When the player is set to output progressive

scan video, the PRGSVE indicator lights in the

front panel display.

Important

• When Component Out (page 35) is set to

Progressive, there is no video output from

the VIDEO OUT (composite) and S (S-

video) jacks.

• If you want to display video on more than

one monitor simultaneously, make sure

the player is set to Interlace.

• If you connect a TV that is not compatible

with a progressive scan signal and switch

the player to progressive, you will not be

able to see any picture at all. In this case,

switch everything off and reconnect using

the supplied video cable (see Easy

connections on page 11), then switch back

to Interlace (see below).

Switching the video output to interlace

using the front panel controls

Switch the player to standby then, using the

front panel controls, press

while pressing

to switch the player back to

Interlace.

• DV-490V only: If the player is connected

using HDMI, disconnect the HDMI cable

before resetting the player to interlace

output. (If left connected, the HDMI output

Connecting to an AV receiver

To enjoy multichannel surround sound you

need to connect this player to an AV receiver

using the digital audio output.

In addition to a digital connection, we

recommend also connecting using the stereo

analog connection.

You'll probably also want to connect a video

output to your AV receiver. You can use any of

the video outputs available on this player (the

illustration shows a standard (composite)

connection).

STANDBY/ON

resolution will be reset to its default—see

Resetting the output resolution to the

default setting with HDMI connection on

page 15.)

STANDBY/ON

DV-490V