Pioneer PDP-S42-LR Gebruiksaanwijzing - Pagina 8

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Pioneer PDP-S42-LR. Pioneer PDP-S42-LR 31 pagina's.

③ Catch the hooks on the top of the speakers to the partially

tightened screws, then line up the holes in the hooks on

the bottom of the speakers with the screw holes on the

bottom of the display and partially tighten the included

screws (M4) in them.

WARNING

Connecting the cords

Turn off the power of all connected units before connecting the cords.

Connect the display's EXT SPEAKER R and L

terminals with the speakers' terminals using the

included connection cords.

Screws (M4)

● When the speakers are installed on the display, do not move the unit by lifting up the speakers.

The display could fall and cause injury.

Cord Clamper

Peel off the protective tape from the back

of the clamper, then mount the clamper in

the desired position and clamp the cords

together.

④ Fully tighten the four partially tightened screws.

*Push the speaker against the display while driving

the screw.

There is polarity

connection cord.

Connect each conductor to the correct terminal.

While holding the button of each speaker

terminal, insert a conductor of the

connection cord.

E-3

with the conductor of each

＋ −

Black

Red