Pioneer S-1EX Gebruiksaanwijzing - Pagina 2

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Pioneer S-1EX. Pioneer S-1EX 28 pagina's. Ex series
Ook voor Pioneer S-1EX: Brochure & specificaties (16 pagina's), Servicehandleiding (12 pagina's)

Pagina afdrukken

Thank you for buying this Pioneer product. Please read

through these operating instructions so you will know how to

operate your model properly. After you have finished reading

the instructions, put them away in a safe place for future

reference.

What's in the box

• Spike bases x4 • Nuts (for spikes)

• Metal catch x1

• Fastening screws

(for grille) x4

• Caps x10

Features of this speaker system

• Construction follows leading-edge TAD technology

• Beryllium dual-concentric tweeter

• Aramid/carbon fiber reinforced composite 18 cm woofer

• Perfect time alignment design

Before you start

• The nominal impedance of this speaker system is 6 Ω.

Connect the speaker system to an amplifier with a load

impedance ranging from 4 Ω to 16 Ω (a model with "4 –

16 Ω" displayed on the speaker output terminals).

• Do not touch the speaker cones as they are easily

damaged.

• Do not place magnetic objects such as screwdrivers or

iron parts near the tweeter or midrange. Since the

speakers use strong magnets, the objects may be

attracted, causing injury or damaging the diaphragm.

In order to prevent damage to the speaker system resulting

from input overload, please observe the following precau-

tions:

• Do not supply power to the speaker system in excess of

the maximum permissible input.

• When connecting or disconnecting anything in your AV

system, make sure the amplifier is switched off.

• When using a graphic equalizer to emphasize loud

sounds in the high-frequency range, do not use exces-

sive amplifier volume.

• Hex wrench

• Screw (for metal catch)

• Finishing screws

(for grille) x4

• Grille x1

• Operating instructions

• Do not try to force a low-powered amplifier to produce

loud volumes of sound (the amplifier's harmonic

distortion will be increased, and you may damage the

speaker).

Caution: installation

• Do not place the speaker on an unstable surface. It

could present a hazard if it falls, as well as damaging the

equipment. If placing the speaker on a thick carpet, we

recommend using the supplied speaker spikes for

stability.

• Switch off and unplug your AV equipment and consult

the instructions when connecting up components. Make

sure you use the correct connecting cables.

• Do not put a TV or other AV equipment on top of this

speaker. It could present a hazard if it falls, as well as

damaging the equipment.

• Do not install your speakers overhead on the ceiling or

wall. If improperly attached, the speaker grille can fall

and cause damage or personal injury.

• Do not attach these speakers to the wall or ceiling. They

may fall off and cause injury.

Caution: in use

• Do not use the speaker to output distorted sound for

long periods of times. This can result in a fire hazard.

• Do not sit or stand on the speaker, or let children play on

the speaker.

• Do not put large or heavy objects on top of the speaker.

WARNING: Handling the cord on this product or

cords associated with accessories sold with the

product will expose you to chemicals listed on

proposition 65 known to the State of California and

other governmental entities to cause cancer and

birth defect or other reproductive harm.

Wash hands after handling

Installing your speaker

Please observe the following points when installing speakers:

• Sounds played through speaker systems are easily

affected in subtle ways by the conditions in the listening

space.

• On the rear of the speaker is a hole provided to attach a

metal catch. This is for stabilizing the speaker so that in

the event of an earthquake etc., the speaker does not fall

over. Use the supplied screws to attach the catches.

D36-P4_A_En