Pioneer S-7EX XTW/E Servicehandleiding - Pagina 8

Blader online of download pdf Servicehandleiding voor {categorie_naam} Pioneer S-7EX XTW/E. Pioneer S-7EX XTW/E 10 pagina's. Ex series
Ook voor Pioneer S-7EX XTW/E: Catalogus (20 pagina's), Gebruiksaanwijzing (24 pagina's), Brochure & specificaties (16 pagina's)

Pagina afdrukken

2.3.3 Removal/Reattachment of Acoustic absorbent pads

Removal/reattachment of acoustic absorbent pads is necessary before or after removal/reattachment of the Network Assy.

Note:

When reattaching the Network Assy for the midrange/tweeter, before reattaching the closure panel, be sure to remove the

acoustic absorbent pads located behind the chamber. (See Fig. 2-8.) If the closure panel pinches an acoustic absorbent

pad when it is secured, air leakage may occur, which may result in poor performance of this speaker system.

1. Acoustic absorbent pads around the Network Assy

for the midrange/tweeter

2 Remove this acoustic absorbent pad. When reattaching,

roll the acoustic absorbent pad and push it in deep behind

the chamber. As this acoustic absorbent pad must be fixed

with adhesive, before pushing it in, apply adhesive to the

deep behind the chamber.

(Adhesive: DIABOND black/GYL-014)

1 Remove this acoustic absorbent

pad. When reattaching, push it in

so that it covers the Network Assy.

Fig. 2-5: After the left woofer is removed (1)

2. Acoustic absorbent pads around the input terminals

Fig. 2-6: After the left woofer is removed (2)

3. Acoustic absorbent pads around the Network Assy

for the woofers

Fig. 2-7: After the right woofer is removed (1)

In this state, remove the screws

that secure the Network Assy.

3 Remove the 3 acoustic absorbent

pads pushed into the concave

part of the input terminals.

When reattaching, fold the acoustic

absorbent pad in half and push it in.

In this state, remove or reattach the

nuts of the input terminals.

5 Remove the acoustic absorbent

pads from around the Network Assy

then remove the screws that secure

the Network Assy.

Remove this acoustic absorbent pad.

When reattaching, roll the pad and

push it in deep behind the chamber.

As this rolled acoustic absorbent pad

must be fixed with adhesive, before

pushing it in, apply adhesive to the

deep behind the chamber.

(Adhesive: DIABOND black/GYL-014)

S-7EX

Fig. 2-8: After the right woofer is removed (2)

4. Acoustic absorbent pads inside the chamber for

the midrange/tweeter

Fig. 2-9: After the midrange/tweeter is removed (1)

Fig. 2-10: After the midrange/tweeter is removed (2)

Fig. 2-11: After the midrange/tweeter is removed (3)

6 Remove the 3 acoustic absorbent

pads that are stuffed in the space

behind the chamber for the

midrange/tweeter.

Insert your hand in the direction of the

arrow to remove.

Removal/reattachment of the Network

Assy must be done in this state.

1 Remove this acoustic absorbent

pad. When reattaching, place it

along the surface inside the

chamber so that it forms a U

shape.

2 Remove this acoustic absorbent

pad. When reattaching, place it

along the surface of the chamber

from the upper to the lower boards,

so that it forms a U shape.

3 Remove this acoustic absorbent

pad (from the closure panel

section).

When reattaching, fold the

acoustic absorbent pad in half

and push it in.

Removal/reattachment of the closure

panel and the Network Assy for the

midrange/tweeter must be done in

this state.