Pioneer PDP-4214HD Gebruiksaanwijzing - Pagina 43

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Pioneer PDP-4214HD. Pioneer PDP-4214HD 47 pagina's. Pioneer 3rd, 4th % 5th generations plasma panel quick reference parts lists
Ook voor Pioneer PDP-4214HD: Onderdelenlijsten (12 pagina's)

Pagina afdrukken

11 Appendix

Appendix

Troubleshooting

Problem

• No power.

• No picture or sound

• Normal picture but no sound

• No picture or black and white

picture

• Sound and picture interference

• Blurred or snowy picture, distorted

sound

• Remote control malfunctions

12-PDP42A3HD-Eng (43-46)

Possible Solution

• Make sure the Plasma Display is connected correctly. (See page 18.)

• Is the power cord disconnected? (See page 18.)

• Has the power been turned on? (See page 19.)

• Check if you pressed TV

If the STANDBY indicator on the Plasma Display lights up red, press TV .

• Check if the power cord is connected correctly.

• Check that you have pressed the TV

Plasma Display.

• Select an input source responding to that particular source.

• Check the picture contrast and brightness settings.

• Check the volume.

• Check whether the MUTING button on the remote control has been pressed.

• Adjust the color settings.

• Check that the correct broadcast system is selected.

• Try to identify the electrical appliance that is affecting the Plasma Display, then move it further away.

• Plug the Plasma Display into a different wall outlet.

• Check the direction, location and connections of your aerial. Such interference often occurs due to

the use of an indoor aerial.

• Press the INPUT button to select the Plasma Display or an external device.

• Replace the batteries in the remote control.

• Install batteries ensuring that the <+> and – ends of the batteries are inserted correctly.

• Check the angle and distance of the remote control to the Plasma Display. Make sure there are no

obstacles between the remote control and the Plasma Display.

• Check that the correct function button has been pressed.

• Change the location of light sources or the direction of the Plasma Display to avoid glare.

on the remote control unit. (See page 19.)

on the remote control or the STANDBY/ON botton on the

05.4.20, 4:32 PM