Ariston LFO 3P31 WL X Dagelijkse referentiehandleiding - Pagina 4
Blader online of download pdf Dagelijkse referentiehandleiding voor {categorie_naam} Ariston LFO 3P31 WL X. Ariston LFO 3P31 WL X 8 pagina's.
Pagina afdrukken
OPTIONS AND FUNCTIONS
OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL).
If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED flashes rapidly 3 times
and beeps will sound. The option will not be enabled.
ZONE WASH 3D
Option works with one rack at once. In particular, we
recommend to use it with Mixed and Intensive cycles -
thanks to the additional 3D water jets placed on the bottom
o the cavity, ZONE WASH 3D option allows to save energy
or to increase the washing performance of the dishwasher:
• ZONE WASH 3D + MIXED CYCLE: it allows to reduce energy
consumption up to 40%.
• ZONE WASH 3D + INTENSIVE CYCLE: it increases the washing
performances up to 40%. Ideal for very soiled mixed loads,
e.g. pans and saucepans, dishes with heavy encrustation
or difficult-to-clean crockery (grater, vegetable mill, dirty
cutlery).
How to activate the option:
1. Select a compatible cycle
2. By default the appliance washes dishes in all racks. To wash
only the specific rack, press this button repeatedly:
shown on the display (only lower rack)
shown on the display (only upper rack)
shown on the display (only cutlery rack)
shown on the display (option is OFF and the appliance will
wash dishes in all racks).
Remember to load the upper or lower rack only,
and to reduce the amount of detergent accordingly.
If upper rack is removed, please apply detergent directly
to tub instead of detergent dispenser.
SHORT TIME
This option can be used to reduce the duration of the main
programs while maintaining the same washing and drying
performance levels.
After selecting the program, press the SHORT TIME button
and the indicator light will switch on. To deselect the option,
press the same button again.
KEYLOCK
A long press (for 3 seconds) of SHORT TIME button, will activate
the KEYLOCK function. The KEYLOCK function will block
the control panel except the ON/OFF button. To deactivate
the KEYLOCK, long press again.
WATER TAP CLOSED – Alarm
Flashes when there is no inlet water or water tap is closed.
EXTRA DRY
To improve the drying of the dishes, after selecting the program,
press the EXTRA DRY button and the indicator light comes on.
A higher temperature during the final rinse and an extended
drying phase allow for improving drying. To deselect
the option, press the same button again. The EXTRA DRY option
results in the lengthening of the wash cycle.
4
TABLET (Tab)
This setting allows you to optimize the performance
of the program according to the type of detergent used.
Press the TABLET button (the indicator light will light up,
the corresponding symbol will light up) if you use combined
detergents in tablet form (rinse aid, salt and detergent in 1 dose).
If you use powder or liquid detergent, this option should be off.
DELAY
The start of the program may be delayed for a period of time
between 0:30 and 24 hours.
1. Select the program and any desired options. Press the DELAY
button (repeatedly) to delay the start of the program.
Adjustable from 0:30 to 24 hours. With each press of the button,
the delay start increases by: 0:30 if selection below
4 hours, 1:00 if selection is below 12 hours, 4 hours
if selection is above 12 hours. If 24 hours reached,
and the button is pressed, the delayed start is deactivated.
2. Press the START/PAUSE button: the timer will begin
counting down;
3. Once this time has elapsed, the indicator light switches off
and the program begins automatically.
If at the time of the countdown the START/PAUSE button is
pressed again the DELAY option is cancelled and the selected
program starts automatically.
The DELAY function cannot be set once a program has
been started.
DRAIN OUT
To stop and cancel the active cycle, the Drain Out function
can be used.
A long press of START/PAUSE button, will activate the DRAIN
OUT function. The active program will be stopped and the water
in the dishwasher will be drained out.
ActiveDry
ActiveDry is a convection drying system which automatically opens
the door during/after drying phase to ensure exceptional drying
performance every day. Door opens at the temperature that is safe
to your kitchen furniture, thus door will not be opened when the option
of SHORT TIME is on.
As additional steam protection, special designed protection foil is added
together with the dishwasher (depending on the model type - can
be the need to buy it). To see how to mount protection foil please refer
to (INSTALLATION GUIDE).
ActiveDry functionality could be disabled by the user as follows:
• To DISABLE: Switch On, then switch Off. Keep the P button pressed
for 5 sec., at the end of 5 sec the dishwasher plays a short beep. Switch
On the machine, the display shows „oOF".
• To ENABLE: Switch On, then switch Off the machine. Keep the P button
pressed for 5 sec., at the end of 5 sec the dishwasher plays a short beep.
Switch On the machine, the display shows „oOn".